✦ LIBER ✦

An elastoplastic analysis of flange wrinkling in deep drawing process

✍ Scribed by E. Chu; Yu Xu

Publisher: Elsevier Science
Year: 2001
Tongue: English
Weight: 250 KB
Volume: 43
Category: Article
ISSN: 0020-7403
DOI: 10.1016/s0020-7403(00)00091-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Determination of optimum process paramet

Determination of optimum process parameters for wrinkle free products in deep drawing process

✍ Anupam Agrawal; N. Venkata Reddy; P.M. Dixit 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 352 KB

In the present work, an attempt is made to predict the minimum blank holding pressure required to avoid wrinkling in the flange region during axisymmetric deep drawing process. Thickness variation during the drawing is estimated using an upper bound analysis presented in this paper. The minimum blan

Investigation into the wrinkling behavio

Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory

✍ J. B. Kim; J. W. Yoon; D. Y. Yang 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 936 KB

## Abstract The initiation and growth of wrinkles are influenced by many factors such as stress ratios, the mechanical properties of the sheet material, the geometry of the workpiece, and contact condition. It is difficult to analyse wrinkling initiation and growth while considering all the factors

A finite element analysis of rigid-plast

A finite element analysis of rigid-plastic deformation of the flange in a deep-drawing process based on a fourth-degree yield function

✍ M. Gotoh; F. Ishisé 📂 Article 📅 1978 🏛 Elsevier Science 🌐 English ⚖ 817 KB

A finite element analysis of the rigid-p

A finite element analysis of the rigid-plastic deformation of the flange in a deep-drawing process based on a fourth-degree yield function—II

✍ M Gotoh 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 683 KB