An Approach to Calculating Wear on Annular Non-Return Valves
✍ Scribed by Helmut Potente; Wilhelm H. Többen; Elmar Kaiser
- Publisher
- John Wiley and Sons
- Year
- 2002
- Tongue
- English
- Weight
- 536 KB
- Volume
- 287
- Category
- Article
- ISSN
- 1438-7492
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The serviceability of non‐return valves has a major influence on the productivity of the injection molding process. During a meeting of experts held at our Institute, it was seen that closing behavior and wear are the key problems encountered in practice. The conducted investigations to tackle these questions have shown that both an improved closing behavior and a lower level of wear can be achieved by reducing the inside radius of the locking ring.
Pressure profile over the length of a non‐return valve (n = 0.4; ${\rm \dot V}$ = 25 000 mm^3^/s).
magnified imagePressure profile over the length of a non‐return valve (n = 0.4; ${\rm \dot V}$ = 25 000 mm^3^/s).