An anisotropic gradient damage model for quasi-brittle materials
✍ Scribed by Ellen Kuhl; Ekkehard Ramm; René de Borst
- Publisher
- Elsevier Science
- Year
- 2000
- Tongue
- English
- Weight
- 655 KB
- Volume
- 183
- Category
- Article
- ISSN
- 0045-7825
No coin nor oath required. For personal study only.
✦ Synopsis
An anisotropic continuum damage model based on the microplane concept is elaborated. Scalar damage laws are formulated on several individual microplanes representing the planes of potential failure. These uniaxial constitutive laws can be cast into a fourthorder damage formulation such that anisotropy of the overall constitutive law is introduced in a natural fashion. Strain gradients are incorporated in the constitutive equations in order to account for microstructural interaction. Consequently, the underlying boundary value problem remains well-posed even in the softening regime. The gradient continuum enhancement results in a set of additional partial dierential equations which are satis®ed in a weak form. Additional nodal degrees of freedom are introduced which leads to a modi®ed element formulation. The governing equations can be linearized consistently and solved within an incremental-iterative Newton±Raphson solution procedure. The capability of the present model to properly simulate the localized failure of quasi-brittle materials will be demonstrated by means of several examples.
📜 SIMILAR VOLUMES
To avoid the well-known drawbacks of the classical continuum damage theory when localization occurs, an isotropic gradient-enchanced damage model is proposed in which the loading function not only depends on the damage value, but also on its Laplacian. The initial boundary value problem obtained ado
Non-local and gradient enhanced damage models are able to properly model localization phenomena in quasi-brittle materials. By the introduction of an internal length scale they avoid mesh-size sensitivity in finite element calculations and are capable of describing size effects. To experimentally de
Fracture at a bi-material interface is essentially mixed-mode, even when the geometry is symmetric with respect to the crack and loading is of pure Mode I, due to the differences in the elastic properties across an interface which disrupts the symmetry. The linear elastic solutions of the crack tip