𝔖 Bobbio Scriptorium
✦   LIBER   ✦

An analysis of the growth of short fatigue cracks

✍ Scribed by A.J. McEvily; D. Eifler; E. Macherauch


Publisher
Elsevier Science
Year
1991
Tongue
English
Weight
984 KB
Volume
40
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.

✦ Synopsis


Ah&met-The behavior of short fatigue cracks cannot be analysed by linear elastic methods because of large scale plasticity effects as well as a breakdown in the stress intensity factor correlation of fatigue crack growth rates for crack sizes less than a millimeter in length. In the present paper a number of modifications are introduced to the linear elastic approach to establish a new parameter which is capable of correlating both long crack and short crack fat&m crack growth data. These modifications include the use of a material constant, r,; an allowance for large scale plasticity effects; allowance for the development of crack closure; and the incorporation of the fatigue crack growth threshold. The new parameter is used with reasonable success in calculating fatigue crack growth behavior of short cracks in notched and unnotched spechnens, and comparing with experimental data. In addition the analysis leads to a rationale for the dependence of the stress amplitude at the endurance level on the mean stress in a manner consistent with Gerber's parabolic relationship.


πŸ“œ SIMILAR VOLUMES


The effect of pre-stress cycles on fatig
✍ Tai Shan Kang; H.W. Liu πŸ“‚ Article πŸ“… 1974 πŸ› Elsevier Science 🌐 English βš– 561 KB

Cychc pre-stress increases subsequent fatigue crack growth rate in 2024-T3Sl ahrminum ahoy. This increase in growth rate, caused by the pre-stress, and the increased rate, caused by temper embrittlement as observed by Ritchie and Knott, cannot be explained by the crack tip blunting model alone. Each

On the theory of fatigue crack growth
✍ Genady P. Cherepanov; Habil Halmanov πŸ“‚ Article πŸ“… 1972 πŸ› Elsevier Science 🌐 English βš– 733 KB

The theoretical study is advanced to describe quantitatively the crack propagation under cyclic loads. The main assumptions accepted are: (a) a crack grows by loading during every cycle, and (b) the specific dissipation energy is a material constant. The latter contains. the known concept by Irwin a