Amperometric method for the determination of nitrate in water
✍ Scribed by Neil G. Carpenter; Derek Pletcher
- Publisher
- Elsevier Science
- Year
- 1995
- Tongue
- English
- Weight
- 683 KB
- Volume
- 317
- Category
- Article
- ISSN
- 0003-2670
No coin nor oath required. For personal study only.
✦ Synopsis
An amperometric method for the determination of nitrate in water has been developed. A small addition of acid copper sulfate is made to the sample and a potential pulse sequence is used to measure the current for the reduction of nitrate at an in situ, freshly plated copper surface. The procedure works well for the nitrate concentration range 0.1-l mM, important for water intended for human consumption; there appear to be no serious interferences, for example chloride ion at the maximum permitted level does not interfere.
📜 SIMILAR VOLUMES
The analysis of nitrate in water has been studied using novel amperometric and optical sensors. A flow-injection analysis system with amperometric detection has been developed in which nitrate is determined as nitrite after reduction in a cadmium column. The working electrode is glassy carbon modifi
## Abstract Trihalomethanes (THMs), chlorinated by‐products in drinking water, have been determined by comparing some analytical methods, based on the following techniques: liquid–liquid extraction‐gas chromatography‐mass spectrometry (LLE‐GC‐MS), headspace‐gas chromatography‐mass spectrometry (hea
this class under s~ecified conditions. This will be more difficult to fix definitely, for a certain latitude must always be permitted to satisfy special conditions. This limit will certainly be different for different sections of the country. I think, however, that for the vicinity of Philadelphia o