✦ LIBER ✦

Amine-terminated polysulfone as modifier for epoxy resin

✍ Scribed by D. Ratna; M. Patri; B.C. Chakraborty; P.C. Deb

Publisher: John Wiley and Sons
Year: 1997
Tongue: English
Weight: 166 KB
Volume: 65
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(19970801)65:5<901::aid-app7>3.0.co;2-r

No coin nor oath required. For personal study only.

✦ Synopsis

The synthesis of carboxyl-terminated poly(ethylene glycol adipate) (CTPA) and amine-terminated poly(amide sulfone) (ATPS) based on the CTPA and 4,4 -diaminodiphenyl sulfone (DDS) is described. The products were characterized by IR and 13 C-NMR spectroscopic analysis, nonaqueous titration, viscosity measurement, and solubility characteristics. The developed ATPS was incorporated as a modifier into the epoxy matrix and its effect was studied by DSC and DMTA. It was found that ATPS forms a compatible blend with epoxy and imparts flexibility to the epoxy matrix.

📜 SIMILAR VOLUMES

Amine-terminated oligoimides for epoxy c

Amine-terminated oligoimides for epoxy curing

✍ H. S. Patel; V. J. Shah; A. B. Mathur 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 369 KB 👁 1 views

Oligoimides of N,iV',-4,4'-bismaleimidodiphenyl ether (DDEBM) and 4,4'-diaminodiphenylmethane (DDM) were prepared by the Michael addition reaction. The synthesized oligoimides (DDEBM-DDM) were characterized for their molecular structure by elemental analysis and IR spectroscopy. The number-average m

Acrylate-based liquid rubber as impact m

Acrylate-based liquid rubber as impact modifier for epoxy resin

✍ D. Ratna; A. K. Banthia; P. C. Deb 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 315 KB 👁 2 views

## Abstract Carboxyl‐terminated poly(2‐ethyl hexyl acrylate) (CTPEHA) having various molecular weights were synthesized by bulk polymerization in the form of liquid rubber. The liquid rubbers (LR‐1 to LR‐4) were characterized by ^13^C‐NMR spectroscopic analysis, nonaqueous titration, and vapor‐pres

Morphology control in polysulfone-modifi

Morphology control in polysulfone-modified epoxy resins by demixing behavior

✍ M. I. Giannotti; M. S. Solsona; M. J. Galante; P. A. Oyanguren 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 408 KB 👁 2 views

Blends of epoxy resin with amine-termina

Blends of epoxy resin with amine-terminated polyoxypropylene elastomer: Morphology and properties

✍ M. Franco; I. Mondragon; C. B. Bucknall 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 263 KB 👁 2 views

A liquid diglycidyl ether of bisphenol A (DGEBA) epoxy resin is blended in various proportions with amine-terminated polyoxypropylene (POPTA) and cured using an aliphatic diamine hardener. The degree of crosslinking is varied by altering the ratio of diamine to epoxy molecules in the blend. The mixt

Blends of modified epoxy resin and carbo

Blends of modified epoxy resin and carboxyl-terminated polybutadiene. I

✍ Shailesh Kumar Shukla; Deepak Srivastava 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 100 KB 👁 2 views

## Abstract Six blend samples were prepared by the physical mixing of epoxidized resole (EDR) with different weight ratios of carboxyl‐terminated polybutadiene (CTPB) liquid rubber ranging from 0 to 25 wt % in intervals of 5 wt %. The formation of various reaction products during the curing of unbl

Novel Amine Modifiers for Unsaturated Po

Novel Amine Modifiers for Unsaturated Polyester Resins

✍ Jerzy Duliban 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 167 KB 👁 2 views

Gelation times of unsaturated polyester resins with various amount of chemically incorporated amine glycol modifier A, B, or C, respectively. The amount of benzoyl peroxide initiator added per 25 g of resin: (f) 0.5 g; (0) 1 g.