𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Al-Fe-Ce alloys based on water-atomized powders for high-temperature applications

✍ Scribed by O. D. Neikov; Yu. V. Mil’man; A. I. Sirko; A. V. Samelyuk; A. V. Krainikov; N. A. Efimov

Publisher
Springer
Year
2007
Tongue
English
Weight
468 KB
Volume
46
Category
Article
ISSN
1573-9066

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Ferritic Fe–Al–Ni–Cr alloys with coheren
Ferritic Fe–Al–Ni–Cr alloys with coherent precipitates for high-temperature applications
✍ C. Stallybrass; G. Sauthoff 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 350 KB

Strengthening by a homogeneous distribution of a second phase is a concept that is widely employed in high-temperature materials. It is shown that suitable microstructures can be obtained in the Fe-Al-Ni-Cr system with ordered (Ni, Fe)Al precipitates in a ferritic matrix. These precipitates lead to

Investigation on powder metallurgy Cr–Si
Investigation on powder metallurgy Cr–Si–Ta–Al alloy target for high-resistance thin film resistors with low temperature coefficient of resistance
✍ X.Y. Wang; Z.S. Zhang; T. Bai 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 504 KB

The sputtering target for high-resistance thin film resistors plays a decisive role in temperature coefficient of resistance (TCR). Silicon-rich chromium (Cr)-silicon (Si) target was designed and smelted for high-resistance thin film resistors with low TCR. Valve metal tantalum (Ta) and aluminum (Al

Oxide scale formation on Al containing N
Oxide scale formation on Al containing Ni–Cr-based high temperature alloys during application as flame tube material in recirculation oil burners
✍ H. Ackermann; G. Teneva-Kosseva; H. Köhne; K. Lucka; S. Richter; J. Mayer 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 607 KB

## Abstract The flame tube is an important functional component of burners using the concept of the flame tube stabilised combustion. Under typical combustion conditions the material of the flame tube is exposed to high temperatures (≥900 °C) and to corrosion attack by the combustion gases. Further