The material tested in this work is 2024 aluminum alloy reinforced with particulate silicon carbide SiCp . The material was produced by a squeeze-casting technique, which gives rise to composites with a uniform distribution of SiCp throughout the matrix. The effects of the percentage of additives on
Aging behavior of a 2024 Al alloy-SiCp composite
β Scribed by S.M.R. Mousavi Abarghouie; S.M. Seyed Reihani
- Publisher
- Elsevier Science
- Year
- 2010
- Weight
- 965 KB
- Volume
- 31
- Category
- Article
- ISSN
- 0261-3069
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Compressive and wear properties of bulk nanostructured Al2024 alloy prepared by mechanical milling and hot pressing methods were investigated. Al2024 powders were subjected to high-energy milling for 30 h to produce nanostructured alloy. As-milled powders were compacted at 500 Β°C under 250 MPa in a
Aluminium matrix composites reinforced with unoxidized or oxidized SiC particles and varying Mg concentrations have been prepared using stir casting technique. The extent of interfacial reactions and composition of the reaction products, formed at the Al-SiC interfaces in as-cast form, and after hea
The coefficient of thermal expansion (CTE) and accumulated plastic strain of the pure aluminum matrix composite containing 50% SiC particles (Al/SiC p ) during thermal cycling (within temperature range 298-573 K) were investigated. The composite was produced by infiltrating liquid aluminum into a pr