✦ LIBER ✦

Aging and performance of structural film adhesives. III. Effect of humidity on a modern aerospace adhesive

✍ Scribed by B. C. Ennis; P. J. Pearce; C. E. M. Morris

Publisher: John Wiley and Sons
Year: 1989
Tongue: English
Weight: 782 KB
Volume: 37
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1989.070370102

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Aging and performance of structural film

Aging and performance of structural film adhesives. II. Comparison of two nitrile–epoxy systems

✍ P. J. Pearce; R. G. Davidson; C. E. M. Morris 📂 Article 📅 1983 🏛 John Wiley and Sons 🌐 English ⚖ 556 KB

The effects of thermooxidative aging on

The effects of thermooxidative aging on the fatigue behavior of a structural adhesive

✍ Fred J. Weber; Robert E. Montgomery; J. Scott Thornton; David F. White 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 592 KB

Aging and performance of structural film

Aging and performance of structural film adhesives. IV. A modified epoxy with improved ambient temperature shelf life

✍ P. J. Pearce; B. C. Ennis 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 644 KB

Aging and performance of structural film

Aging and performance of structural film adhesives. I. A comparison of two high-temperature curing, epoxy-based systems

✍ P. J. Pearce; R. G. Davidson; C. E. M. Morris 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 773 KB

The effect of freeze–thaw cycling on som

The effect of freeze–thaw cycling on some structural film adhesives

✍ I. Grabovac; S. A. Mestan; C. E. M. Morris 📂 Article 📅 1984 🏛 John Wiley and Sons 🌐 English ⚖ 196 KB 👁 2 views

The effect of varied monomer composition

The effect of varied monomer composition on adhesive performance and peeling master curves for acrylic pressure-sensitive adhesives

✍ M. D. Gower; R. A. Shanks 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 96 KB 👁 2 views

## Abstract A group of pressure‐sensitive adhesives were prepared with constant glass transition temperature, using emulsion polymerization. The monomers chosen were butyl acrylate, 2‐ethylhexyl acrylate, and methyl methacrylate, along with a small amount of acrylic acid. The proportion of acrylic