Advances in VLSI, Signal Processing, Power Electronics, IoT, Communication and Embedded Systems: Select Proceedings of VSPICE 2022 (Lecture Notes in Electrical Engineering, 1062)

✍ Scribed by Shubhakar Kalya (editor), Muralidhar Kulkarni (editor), Subramanya Bhat (editor)

• Publisher: Springer
• Year: 2023
• Tongue: English
• Leaves: 339
• Edition: 1st ed. 2024
• Category: Library

✦ Synopsis

This book comprises select peer-reviewed papers from the International Conference on VLSI, Signal Processing, Power Electronics, IoT, Communication, and Embedded Systems (VSPICE-2022). The book provides insights into various aspects of electronics and communication engineering as a holistic approach. The various topics covered in this book include VLSI, embedded systems, signal processing, communication, power electronics, and the Internet of Things. The contents mainly focus on the most recent innovations, trends, concerns, and practical challenges and their solutions. This book is useful for academicians, professionals, and researchers in the area of electronics and communications and electrical engineering.

✦ Table of Contents

Preface
Contents
About the Editors
Prototype for Parking Shield System Using Raspberry Pi
1 Introduction
2 Problem Definition
3 Objectives
4 Literature Review
5 Methodology
6 Tests and Results
7 Conclusion
References
Design and Implementation of Smart Waste Management System
1 Introduction
2 Literature Survey
3 System Description
4 Results and Discussions
5 Conclusion
References
Multiplier Design for the Modulo Set { 2n - 1,2n ,2n + 1 - 1 } and Its Application in DCT for HEVC
1 Introduction
2 Proposed Multiplier Unit and Its Implementation in FPGA
3 DCT Architecture for HEVC
4 Conclusion
References
Modelling Performance Analysis in VLSI Testing Methodologies
1 Introduction
2 Queuing Strategy in VLSI Testing Methodology of Services
3 M/G/1 Modelling and Study of Solving
3.1 Conventions, Nomenclature, and Model Assumptions
3.2 Measured Approach to the VLSI Testing Methods’ Queuing Structure
4 Summary and Conclusion
References
Verification of AHB2APB Bridge Protocol Using UVM
1 Introduction
2 Related Works
3 Methodology
4 Implementation Details
5 Results and Optimization
6 Conclusion
References
Design and Verification of AMBA AHB Protocol Using UVM
1 Introduction
2 Literature Review
3 Design Methodology
4 Verification Methodology
5 Results and Discussion
6 Conclusion
References
Dictowriter: Speech to Text Plotter
1 Introduction
2 Literature Survey
3 System Design
3.1 Software Overview
3.2 Hardware Overview
4 Implementation
4.1 Hardware Implementation
4.2 Control and Processing Unit
4.3 CNC Plotter Controller
5 Results and Discussion
5.1 Accuracy
5.2 Speed
6 Conclusion
References
Classification Performance Analysis of CART and ID3 Decision Tree Classifiers on Remotely Sensed Data
1 Introduction
2 Study Areas
3 Decision Trees
4 Methodology
5 Results and Analysis
6 Conclusions
References
Spectral Splitting of Speech Using Time Varying Comb Filters to Improve Speech Perception in Sensorineural Hearing Loss Subjects
1 Introduction
2 Designing
3 Results
4 Conclusion
References
Soil Erosion Studies of Mangaluru Coastal Region Using Satellite Imageries and Machine Learning Algorithms
1 Introduction
2 System Implementation
3 Methodology
4 PCA and Image Processing
5 Machine Learning Algorithm and Mathematical Model
6 Results and Discussions
7 Conclusion
References
Denoising of ECG Signal Using Optimized IIR Filter Architecture—A CSD-Based Design
1 Introduction
2 Design of Digital Filter
2.1 Requirements of Digital Filter—Application Perspective
2.2 IIR Filter Realization Using Difference Equation
3 Proposed IIR Filter Design
3.1 Proposed IIR Filter Design
3.2 Canonic Signed Digit (CSD) Representation
3.3 Resource Requirements for IIR Filter
4 Results and Discussions
4.1 Experimental Setup
4.2 Resources and Tools Used
4.3 Simulation Results
4.4 Comparative Analysis
4.5 Implementation Details
5 Conclusion
References
Deep Learning Analysis for Skin Cancer Detection
1 Introduction
2 Proposed Methodology
2.1 Training Phase
2.2 Testing Phase
2.3 Detailed Design and Methodology
3 Experimental Results and Discussions
3.1 Reading the Data and Processing
3.2 Split the Data
3.3 Train the Model
3.4 Design a User Interface
3.5 System Testing and Unit Testing
4 Limitations and Future Scopes
5 Conclusion
References
Design and Development of a BCI Framework to Control a UTM Using EEG Headset
1 Introduction
2 Related Work
3 Materials and Methods
4 Results and Discussion
5 Conclusion
References
Approximate Compressors-Based Multiplier for Image Processing and Neuromorphic Modeling
1 Introduction
2 Approximate Multipliers
3 Application of 4:2 Inexact Compressor in Image Processing
4 Selection Based Multiplier
5 Methodology of Increasing Performance of Existing Designs
6 Application in Leaky-Integrate and Fire Model (LIF)
7 Conclusion
References
Integration of Particle Swarm Optimization and Sliding Mode Control: A Comprehensive Review
1 Introduction
2 Literature Review
3 Integration of PSO and SMC
4 Conclusion
References
Design and Testing of a Solar Powered Automated Fruit and Vegetable Sorter
1 Introduction
2 Current Systems
2.1 Agricultural Automation
2.2 Quality Control
2.3 Sorting
3 Methodology
3.1 Block Diagram
3.2 Workflow
3.3 Design of the Proposed System
3.4 Construction of Vegetable Sorter
4 Methodology
4.1 Development of GUI
4.2 Project Testbench
4.3 Power Calculation
5 Conclusion
References
Characterization of Dust Particles and Their Impact on the Performance of Photovoltaic Panels: A Laboratory Investigation
1 Introduction
2 Experimental Setup
3 Characterization of Dust Samples
4 Results and Discussion
5 Conclusion
References
Design and Analysis of DC-DC Boost Converter
1 Introduction
2 Design of Boost Converter
2.1 Relation Between Input and Output Voltage
2.2 Inductor Design
2.3 Capacitor Design
2.4 Switch Design
2.5 Component Design
3 Analysis in Open Loop
4 Design and Analysis of Controllers
4.1 Need for Compensation
4.2 Type-III Compensator
4.3 Type-III Compensator Design
5 Simulation
6 Result
7 Conclusion
References
Energy Management Analysis on Smart Street Lighting for Smart Cities
1 Introduction
2 Centralized Control Monitoring Systems (CCMS)
2.1 Network Architectures and Communication Protocol for the CCMS
2.2 Power Saving Strategy
3 Conclusion
References
Design and Development of Efficient Feeding Network Structure for Patch Antenna Array Modules in UAV Communication Applications
1 Introduction
2 Design and Analysis of Microstrip Array Antenna
2.1 Single Element Antenna Design on Duroid-5880 and FR4
2.2 Design of 1 × 2 Square Patch Linear Array Antenna with Duroid-5880 and FR4
2.3 Design of 2 × 2 Square Patch Linear Array Antenna with Duroid-5880 and FR4
2.4 Design of 1 × 4 Square Patch Linear Array Antenna with Duroid-5880 and FR4
2.5 Fabrication of 1 × 2 Array Antenna on Duroid-5880
3 Conclusion
References
E—RiCoBiT—II: A High Performing RiCoBiT (Ring Connected Binary Tree) Topology with Fully Adaptive Routing Algorithm
1 Introduction
2 Ricobit Topology
3 E—RICOBIT—2 (Enhanced Ring Connected Binary Tree—II)
4 Results and Discussion
5 Conclusion
References
Design and Development of Autonomous VTOL for Medicine Deliveries in Hilly Areas
1 Introduction
2 Literature Survey
2.1 System Characteristics
2.2 System Architecture
3 Conclusion
References
Implementation and Design of Agile and Multipurpose Autonomous Robot Using ROS
1 Introduction
2 Related Work
3 Methodology
3.1 Software Architecture
3.2 Hardware Architecture
3.3 Experiment Setup
4 Results
5 Conclusion
References
Prediction of Chronic Pain Onset in Patients Experiencing Tonic Pain: A Survey
1 Introduction
1.1 Problem Statement
1.2 Physiological Indicators of Pain
1.3 Pain and Its Assessment
1.4 Parameters Used to Indicate Pain
1.5 Body Sensor Networks for Pain
1.6 Proposition
2 Methodology
2.1 General Overview of the System
2.2 Components on the System
2.3 Procedure
2.4 Edge Computing
3 Results
4 Future Scope
References
Design and Analysis of Miniaturized Broadband Microstrip Patch Antenna for Aircraft Surveillance Applications
1 Introduction
2 Proposed Antenna Designs
2.1 Methodology
2.2 Conventional Patch Antenna
2.3 Evolution of the Proposed Antenna
2.4 Proposed Miniaturized Broadband TCAS Antenna
3 Conclusion
References