𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Advances in the fabrication and characterization of HTSC composite conductors

✍ Scribed by G.N. Riley Jr.; D.R. Parker; C.J. Christopherson; P.K. Miles; J.J. Pickett; S.E. Hughson; J.D. Schreiber; A. Polyanskii; A. Pashitskii; D.C. Larbalestier

Publisher
Elsevier Science
Year
1994
Tongue
English
Weight
160 KB
Volume
235-240
Category
Article
ISSN
0921-4534

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The fabrication and characterization of
The fabrication and characterization of polymer optical conductors
✍ B. Srinivasan; G. C. Martin πŸ“‚ Article πŸ“… 1984 πŸ› John Wiley and Sons 🌐 English βš– 628 KB

Polymer microstructures were evaluated as thin film optical conductors. The polymer waveguides were fabricated from a photosensitive silicone polymer by selectively crosslinking the polymer with the near-ultraviolet radiation from an argon ion laser. The optical transmittance properties of curved an

Advances in the fabrication of titanium
Advances in the fabrication of titanium based composites
✍ C. M. Ward-Close; J. G. Robertson πŸ“‚ Article πŸ“… 1996 πŸ› Springer 🌐 English βš– 774 KB

Titanium alloy metal matrix composites reinforced with silicon carbide fibre are being evaluated for a range of highly loaded aerospace applications. Although expensive, if used selectively they can have a dramatic effect on performance and weight. The SMC has one of the strongest capabilities in Eu

218. The fabrication and the in process
218. The fabrication and the in process characterization of high performance multi-directional carbon-carbon composites
✍ Francois Albugues; Yves Grenie πŸ“‚ Article πŸ“… 1982 πŸ› Elsevier Science 🌐 English βš– 143 KB

The work-of-fracture (ywOF) of carbon-carbon composites was measured for composites with 3-D woven fiber preforms, carbon felts, and chopped fibers. Maximum values were observed for the 3-D preforms and minimum values for the carbon felts. The values are also compared with similar data for graphites