Front Matter ....Pages i-xxii
Impact Model for Grinding Process in the Framework of Sustainable Manufacturing (Jigneshkumar M. Parmar, Chetankumar M. Patel, Ajitkumar N. Shukla)....Pages 1-7
Execution Analysis of Vapor-Compression Refrigeration System Using R12, R134a, R290 and R600a as Working Medium (M. Sivakumar, S. Mahalingam)....Pages 9-17
Design, Optimization and Analysis of Baja Suspension System Using Full Factorial Approach (V. Ajay Ganesh Ram, T. S. Easwar, A. Vishal, A. Andrews, F. Michael Thomas Rex)....Pages 19-27
Aerodynamic Analysis of a 3D Small Wind Turbine Blade Using NACA 63415 Aerofoil with MRF (Veludurthi Ajay, Bolleddu Venkateshwarlu)....Pages 29-42
Trends on the Abrasive Flow and Electric Discharge Machining of Polymer Matrix Composites (R. Vinayagamoorthy, Shubham Kumar, Suraj Kumar, Mote Sai Sharan, G. M. D. Afzal, T. V. Rajamurugan)....Pages 43-53
Influence of Process Variables on the Ultimate Tensile Strength of Friction Stir Welded AA6061 Matrix Composite (Arun Kumar Shettigar, Subramanya R. Prabhu B., Mervin A. Herbert, Shrikantha S. Rao)....Pages 55-63
Mechanical Properties and Microstructural Characteristics of Friction Stir Welded Aluminium Matrix Composite (B. Subramanya R. Prabhu, Arun Kumar Shettigar, Mervin A. Herbert, Shrikantha S. Rao)....Pages 65-73
Influence of Honeycomb Core on Static and Vibration Responses of Sandwich Structures (Sudhansu S. Patro, Ranjan K. Behera, Nitin Sharma, Kamal Kishore Joshi)....Pages 75-83
Influence of Point Mass Over FGM Plate for Vibration Signature in Different Boundary Conditions Using FEA (Kamal Kishore Joshi, Ranjan K. Behera, V. R. Kar, Anugam Chakra)....Pages 85-91
Design and Development of Seed Metering Device Implemented in Power Tiller (C. Devanathan, E. Shankar, A. Sivanand, R. Manimaran, A. Gopinath)....Pages 93-98
Pareto Optimization and Metallurgical Characterizations of Dissimilar Friction Stir Welded AA6061โAA7075 Alloys (R. Dinesh Kumar, R. Varthini, S. Muthukumaran)....Pages 99-108
Emission Reduction in Four-Stroke S.I Engine Using EGR and Catalytic Converter (Abhijith Reji, P. Anu Nair, A. K. Saurav, Insam Ismail, Nidhin Babu)....Pages 109-116
Experimental Analysis of Fuel Spray Impingement Against the Tip on the Performance of CI Engine (G. Gopeekrishnan, P. Anu Nair, Midhun Das, Sandeep Santhosh, Tom Mathew)....Pages 117-123
Solving the Flexible Job Shop Scheduling Problem Using an Effective Jaya Algorithm (Rylan Caldeira, A. Gnanavelbabu)....Pages 125-132
Wear Analysis of Epoxy Resin Composites Reinforced with Seashell (A. Sivanand, C. Devanathan, E. Shankar, P. PrasannaKumar)....Pages 133-141
A Brief Review: Study of Machinability Aspects of Hard Metals Using Micro Textured Inserts (Indraneel Soppa, Swastik Pradhan)....Pages 143-149
Optimization of Process Parameters in EDM Using Standard Deviation and MOORA Method (J. Anitha, Raja Das)....Pages 151-158
Wear Behaviour and Mechanical Properties of AA2024/Al2O3/SiC/Gr HMMC Using Advanced Squeeze Casting Technique (L. Natrayan, M. Senthil Kumar)....Pages 159-167
Experimental Investigation on Machining Properties Carbon Fibre-Reinforced Epoxy Composites with the Addition of Nano SiC (R. Ravi Kumar, Seshadri Sridharan, Arun Kumar Srirangan)....Pages 169-175
Process Parameter Optimization Using TOPSIS for Electric Discharge Machining of Incoloy 800HT (Paul Joshua Samuel, K. C. Aswinkumar, Arunkumar Ganesan, Arun Kumar Srirangan)....Pages 177-185
Analysis on Thermal Properties of PolyethyleneโVinyl Acetate (PEVA) Matrix with Polytetrafluroethylene (PTFE) Particle-Reinforced Composites (R. Mahesh Kumar, N. Rajini, K. Mayandi, Nadir Ayrilmis, M. Srisuryadharan, P. Venkatesh et al.)....Pages 187-193
A Study on Wire Electrical Discharge Machining Process Parameters and Performances (P. S. Gowthaman, S. Jeyakumar)....Pages 195-201
Investigation of Tensile and Morphological Properties of Kevlar/S-Glass/Jute Fibre-Reinforced Epoxy Hybrid Composite (G. Manoj Kumar, S. Kavin Raj, K. S. Ajai Bhalaji, J. Karthik)....Pages 203-212
Optimization of Roller Burnishing Parameters of Al(SiC)p Metal Matrix Composite with TiAlN-Coated Roller Using Response Surface Methodology (E. Shankar, T. Sampath Kumar, M. R. Stalin John, C. Devanathan)....Pages 213-219
Optimization of Machining Parameters During Turning of AISI 316L Stainless Steel Under Nanocutting Fluid Environment (S. D. Sathishkumar, T. Rajmohan)....Pages 221-227
Surface Integrity Studies on WEDM of Magnesium Matrix Nano-SiC Reinforced Composites (S. Vijayabhaskar, T. Rajmohan, K. Lalitesh, S. Sai Vivek)....Pages 229-237
Acoustic, Rheological and Optical Properties of Binary Mixtures of Aqueous Solutions of PEG 200โA Comparative Analysis (P. Dhivya, R. Padmanaban, A. Gayathri, K. Venkatramanan)....Pages 239-244
Comparative Analysis on Mechanical Properties of Luffa and Coconut Coir Fiber Reinforced Polyester Composites (T. V. Rajamurugan, A. Baskaran, S. Matheswaran, S. Epriya Lavanya)....Pages 245-251
Experimental Analysis on the Effect of Cu-ZSM5 on the Control of SI Engine Exhaust Emissions (A. Ananthu, P. Anu Nair, Anand K. Raj, Arjun K. Nair, K. G. Gokul, Arun Ajith et al.)....Pages 253-260
Optimization of SI Engine Cycle with Variable Composition and Specific Heat (Akhil Sukumaran, P. Anu Nair, S. Sourabh Gopal, P. S. Sabin, Jithu M. Suredran, Yadhu P. Mohan)....Pages 261-269
Experimental Studies on the Effect of Mixed Metal Oxide DeNox Catalyst on the Control of CI Engine Exhaust Emission (Jimin Reji, P. Anu Nair, Aravind B. Nair, S. Anas, Rahul Reji, A. S. Akshay)....Pages 271-277
Injection and Exhaust Gas Recirculation Strategies for Reducing Emissions of Cyclohexanol-Diesel Blends in CI Engine (S. Boopathi, J. Ravikumar, R. Devanathan, S. A. Arokya Anicia)....Pages 279-284
A Brief Review: Study on Mechanical Properties of Polycarbonate with Different Nanofiller Materials (Prudhvi Raj, Ravi Kumar)....Pages 285-291
Determination of Impact and Hardness Properties of Neem-Kenaf Fiber Reinforced Polymer Composites (B. Vijaya Ramnath, S. Rajesh, C. Elanchezhian, G. Pon Senthil Kumar)....Pages 293-302
Study on Wear and Corrosion Behaviour of Aluminium Hybrid MMC (B. Vijaya Ramnath, E. Naveen, S. Abhishek Subramanian, R. Rakesh, S. Sharun Krishnan)....Pages 303-314
Effect of Pineapple/Coconut Sheath Fiber Reinforced with Polyester Resin Matrix on Mechanical and Microstructure Properties of Hybrid Polyester Composite (L. Natrayan, M. S. Santhosh)....Pages 315-323
Chemical Treatment, Influence of Fiber Content, and Optimization of Hybrid Natural Fiber-Reinforced Composites (G. Venkatesha Prasanna, Tirunagari Jayadeep, Nikhitha Poornabhodha)....Pages 325-335
Intelligent Automatic Guided Vehicle for Smart Manufacturing Industry (S. Chandramohan, M. Senthilkumaran)....Pages 337-343
Sensitivity Analysis for Welding Parameters in Dissimilar Friction Stir Welded Joints Using Response Surface Methodology (K. Palani, C. Elanchezhian, B. Vijaya Ramnath, A. Adinarayanan)....Pages 345-353
Experimental Investigation of Welding Parameters on Microhardness and Tensile Behaviour of Similar and Dissimilar Submerged FSWed Aluminium Alloy Joints (K. Palani, C. Elanchezhian, B. Vijaya Ramnath, D. Charan, Ch. Divya Prakash, R. Kathiravan et al.)....Pages 355-363
Study on the Influence of Nanosized Silica Reinforcement in Microrubber Blended Epoxy Carbon Composite Laminate Subjected Under Dynamic Mechanical Analysis (R. Ramesh, C. Senthamaraikannan, Niranjan Suresh, B. Lokesh)....Pages 365-372
Moth-Flame Optimization Algorithm for Improving the Surface Roughness on FDM Processed Parts (A. Tamilarasan, D. Rajamani, P. Pranay, P. Manohar, A. Venkata Akhil, B. Thirupathi Reddy)....Pages 373-380
Multi-response Optimization of AWJ Process Parameters in Cut Quality Characteristics of Hastelloy C-276 (A. Tamilarasan, S. Arumugam, D. Rajamani, P. Changareddy, E. Balasubramanian, P. Pranay)....Pages 381-388
Application of Water Cycle Algorithm for Optimizing the PAC Process Parameters in Cutting Tiโ6Alโ4V Alloy (A. Tamilarasan, T. Rajmohan, S. Arumugam, A. Arunpremnath, K. Mohan, P. Manohar)....Pages 389-396
Butterfly Optimization Algorithm for Optimization of Roller Burnishing Process Parameters (A. Tamilarasan, S. Arumugam, D. Rajamani, S. Vijayabhaskar, R. Balakumar, B. Thirupathi Reddy)....Pages 397-403
Multi-objective Optimization of WEDM Process Parameters Using NSGA-II Algorithm (A. Tamilarasan, G. Sriram, S. Arumugam, D. Vijayan, D. Rajamani, A. Venkata Akhil)....Pages 405-411
Water Quality Index and Correlation Study of Temple Ponds in Kanchipuram, Tamil Nadu, India (P. Meenakshi, G. Sriram)....Pages 413-423
Comparative Corrosion Behaviour of Ferrous and Non-ferrous Metals in Bio-lubricant and Bio-diesel Environment (R. Ellappan, S. Arumugam, R. Sundararajan, K. Venkatesh)....Pages 425-432
Multi-response Optimization and Mechanical Behaviour of AlโCu/AlโMgโSi Alloys by Dissimilar Friction Stir Welding (R. Dinesh Kumar, S. Pradeep, S. Muthukumaran)....Pages 433-443
Tribological Behaviour of Al 7075 Alloy Reinforced with Nano-Alumina and Silicon Carbide Particulates (T. S. A. Suryakumari, S. Ranganathan, B. Mahendra Reddy, G. Nethaji, Challam Naveen Kumar)....Pages 445-451
Optimization of Process Parameters on Sliding Wear Behavior of Aluminum 7075 Hybrid Nanocomposite Analyzed Using Desirability Approach-Part II (T. S. A. SuryaKumari, S. Ranganathan)....Pages 453-459
Investigation of Process Parameters on Sliding Wear Behaviour of Aluminium 7075 Hybrid Nanocomposite Analyzed Using Response Surface Methodology-Part I (T. S. A. SuryaKumari, S. Ranganathan)....Pages 461-468
Effect of Process Parameters on Drilling of Carbon Fiber Reinforced Polymers (D. Vijayan, A. Tamilarasan, B. Vignesh Aravind)....Pages 469-476
An Experimental Study on Drilling of Titanium Alloy Using Taguchi-Based Fuzzy Logic Approach (D. Vijayan, T. Rajmohan, A. Raajesh Kanna)....Pages 477-487
Determination of Optimum Tensile Strength of Friction Stir Welded AA2219 Aluminum Alloys Using Taguchi's Method (D. Vijayan, V. Seshagiri Rao, V. S. Anirudh)....Pages 489-497
Analysis of Thrust Force in Drilling of Titanium Alloy Using Taguchi's Method (D. Vijayan, T. Rajmohan, V. Nithin)....Pages 499-507
RSM-Based Optimization of Process Parameters in Synthesis of Pentaerythritol Ester of Rapeseed Oil (P. Vithya, G. Sriram, S. Arumugam)....Pages 509-517
Physical Characteristics of Keyhole in 316L Stainless Steel Joint During an Autogenous Pulsed Laser Beam Welding (A. Jayanthi, K. Venkataramanan, K. Suresh Kumar)....Pages 519-531
Influence of Chemical Treatment on Natural Fibers: A Review (G. Venkatakoteswara Rao, R. Vinayagamoorthy, K. Abinesh, M. Sudharsan, S. Ponmeganathan, L. S. Deepak Kumar)....Pages 533-538
Optimization on Tribological Characteristics of Waste Ayurvedic Oil Blends as an Engine Lubricant Additive (R. Balakumar, G. Sriram, S. Arumugam, S. Jagannath, R. Vamsi Krishnaa, P. Venkatesh)....Pages 539-547
Effect of MWCNT on Mechanical Properties of Glass-Jute Fiber Reinforced Nano Composites (K. Mohan, T. Rajmohan, R. Prasath)....Pages 549-560
Effect of Stacking Sequence on Mechanical Properties of MWCNT Filled Natural Fiber Reinforced Composites (K. Mohan, T. Rajmohan)....Pages 561-569
Optimization of Effective Process Parameters During Pentaerythritol Ester Production Using Taguchi Technique (P. Chengareddy, S. Arumugam, G. Sriram, M. Bhanu Prakash)....Pages 571-578
A Review on Ultrasonicated Transesterification Process (P. Chengareddy, S. Arumugam, P. H. Pavan Kumar Reddy, P. Madhan Mohan Reddy)....Pages 579-585
Tribological Investigation of Waste Plastic Oil-Based Methyl Ester Blended Synthetic Lubricant Using Four-Ball Tribometer (S. Baskar, S. Arumugam, G. Sriram, Venkata Sai Satyanarayana Sastry Sistla)....Pages 587-593
Mechanical Properties of Biodegradable Calotropis GiganteaโJute Fibre Hybrid Composite (A. Arun Premnath, Ankur Sharma, A. Arun Kumar, S. Dinesh Kumar, K. Raghul)....Pages 595-601
The Concept of Metamaterial Used for the Fabrication of Antenna (K. Sugapriya, S. Omkumar)....Pages 603-610
Modeling of Potentially Implementable Configurable Logic Block in Quantum Dot Cellular Automata for Nanoelectronic Device Architecture (R. Jayalakshmi, M. Senthil Kumaran)....Pages 611-617
Application of CuO Nanoparticles as Biodegradable Lubricant Additive for Domestic Refrigerator CompressorsโAn Experimental Investigation (P. Vithya, G. Sriram, S. Arumugam, R. Sundararajan, A. Manikanta)....Pages 619-627
Study on Emission Analysis of Tamarind-Based Ground-Level Pyrotechnics (Manikandan Rajendran, Rajesh Shanmugavel, Rajajeyaganthan Ramanathan)....Pages 629-635
Tribological Characteristics of Aluminum with Volumetric Fractions of Nano-Boron Nitride Composites (M. Ekambaram, M. Vetrivel, D. Balaji)....Pages 637-643
Powder Metallurgy Fabrication, Characterization and Wear Assessment of Al-BN-TiO2 Composites (M. Ekambaram, M. Vetrivel, D. Balaji, Mandala Praveen Kumar, K. Venkatesh, S. Sudarsan Reddy et al.)....Pages 645-651
Optimization in Tribological Behaviour of Al-BN-TiO2 Composites Using D-Optimal Method (M. Ekambaram, M. Vetrivel, D. Balaji)....Pages 653-660
Influence of Aroma Skin Reinforcement on Erosive Behavior of Polyester Composites (Jayamani Manivannan, Shanmugavel Rajesh, Kalimuthu Mayandi, Nadir Ayrilmis)....Pages 661-666
Optimization of Wear Reduction on AlโTiO2โGr Powder Metallurgy Composites Using D-Optimal Method (D. Balaji, M. Vetrivel, M. Ekambaram)....Pages 667-674
Effect of Welding Speed on Advanced CMT-Welded AA 6061 Grade Aluminum Alloy Joints (S. T. Selvamani, S. Velmurugan, S. J. Hariharan, K. Palanikumar)....Pages 675-681
Heat Transfer Analysis on Advanced CMT Welded Low Carbon Steel Joints (S. T. Selvamani, S. Velmurugan, K. Palanikumar)....Pages 683-689