Advances in Frontier Research on Engineering Structures Volume 1

✍ Scribed by Yang Yang, Sudharshan N. Raman, Bingxiang Yuan, Zhijun Xu

• Publisher: CRC Press/Balkema
• Year: 2023
• Tongue: English
• Leaves: 747
• Category: Library

✦ Synopsis

Advances in Frontier Research on Engineering Structures focuses on the research of advanced structures and anti-seismic design in civil engineering. The proceedings present the most cutting-edge research directions and achievements related to civil and structural engineering. Topics covered in the proceedings include

· Engineering Structure and Seismic Resistance

· Structural Mechanics Analysis

· Components and Materials

· Structural Seismic Design

· 3D Printing Concrete

· Other Related Topics

The works of this proceedings will promote development of civil and structural engineering, resource sharing, flexibility and high efficiency. Thereby, promote scientific information interchange between scholars from the top universities, research centers and high-tech enterprises working all around the world.

✦ Table of Contents

Cover
Copyright
Title Page
Table of contents
Preface
Committee members
Keynote Lectures
Research progress on sustainable impact-resistant ultra-high performance concrete
Development of an intelligent technology system for prefabrication and assembly of new ductile tunnel structures
Airport disaster prevention and smart construction
A new approach to constructing the constitutive models for soils based on generalized potential theory
Development and application of key technologies for conservation of earth sites in arid environments
Key technologies for seismic isolation and energy dissipation and damping of industrial buildings
Evolution of soil-water characteristics of expansive soils under dry-wet and freeze-thaw cycles and slope stabilization practice
Analysis of load-bearing characteristics and dynamic response of offshore wind turbines under complex environmental loads
Exploration of molecular dynamics simulations and distributed sensing system for geotechnical engineering
Research progress on the durability of fiber-reinforced polymer (FRP)–reinforced seawater–sea sand concrete (SWSSC)
Performance and mechanical test analysis of civil building materials
Design of new green self-insulation block and experimental study on mechanical and thermal properties
1 INTRODUCTION
2 BLOCK DESIGN OF SELF-INSULATING BLOCK
3 TEST MATERIAL AND SCHEME
4 TEST RESULTS AND ANALYSIS
5 CONCLUSION AND PROSPECT
ACKNOWLEDGMENTS
REFERENCES
Research on concrete crack resistance in negative moment zone of
steel-ECC continuous beam bridge with uplift-restricted and
slip-permitted studs
1 INTRODUCTION
2 FINITE ELEMENT ANALYSIS OF AN ENGINEERING EXAMPLE
3 FINITE ELEMENT VERIFICATION OF A MODEL TEST
4 CONCLUSION
REFERENCES
Study on safety performance of large-thickness sandwich wall panels
1 INTRODUCTION
2 CONNECTOR TESTS
3 TEST ARRANGEMENT AND LOADING METHOD
4 MATERIAL PROPERTIES
5 MEASURING POINT ARRANGEMENT
6 TEST PROCESS
7 ANALYSIS OF TEST RESULTS
8 CONCLUSIONS
REFERENCES
Damage analysis of sulfate erosion of pipe concrete under ultrasonic detection of wet and dry cycle conditions
1 INTRODUCTION
2 MATERIALS AND METHODS
3 TEST RESULTS AND ANALYSIS
4 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Effect of clay content and moisture content on fracture development of red clay
1 INTRODUCTION
2 EXPERIMENTAL SCHEME
3 EXPERIMENTAL RESULTS AND ANALYSIS
4 CONCLUSION
REFERENCES
Shearing and deformation characteristics of the sand compaction pile
inserted clay specimens in conventional triaxial and cyclic triaxial tests
1 INTRODUCTION
2 EXPERIMENTAL PROGRAM
3 RESULTS
4 CONCLUSIONS
REFERENCES
Mechanical properties of joints of a new type of steel-reinforced concrete composite structure
1 INTRODUCTION
2 PROJECT OVERVIEW
3 METHODS AND MATERIALS
4 RESULTS AND DISCUSSION
5 CONCLUSION
REFERENCES
Simulation of mechanical properties of reinforced concrete beam based on ABAQUS
1 INTRODUCTION
2 EXPERIMENTAL PROGRAMS
3 FINITE ELEMENT MODEL
4 RESULTS AND DISCUSSION
5 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Axial compressive behavior of steel tube confined concrete column piers: Experimental and FEA research
1 INTRODUCTION
2 EXPERIMENTAL REVIEW
3 FINITE ELEMENT ANALYSIS
4 PARAMETER ANALYSIS
5 CONCLUSION
REFERENCES
Influence of local expanded holes in tower construction on the mechanical properties of tower
1 INTRODUCTION
2 FINITE ELEMENT MODELING
3 RESULTS AND DISCUSSION
4 CONCLUSION
REFERENCES
Design and test analysis of an innovative grout sleeve with variable spacing of shear grooves
1 INTRODUCTION
2 DESIGN OF GROUT SLEEVE WITH VARIABLE SPACING OF SHEAR GROOVES
3 TEST SCHEME FOR MECHANICAL PROPERTIES OF THE GROUT SLEEVE
4 RESULTS AND ANALYSIS
5 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Experimental study on deformation characteristics of marine soft soil under long-term loading
1 INTRODUCTION
2 MATERIALS AND METHODS
3 ANALYSIS OF RESULTS FOR MARINE SOFT SOIL CONSOLIDATION TESTS
4 VARIATION LAWAND INFLUENCE OF SECONDARY CONSOLIDATIONCOEFFICIENT OF MARINE SOFT SOIL
5 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Study on bonding stress between UHPC steel fiber and concrete: Theory and experiment
1 INTRODUCTIONS
2 STEEL FIBER PULLOUT MECHANISM
3 UHPC STEEL FIBER TENSION MODEL
4 MATERIAL PHYSICAL PARAMETER AND TEST PROCEDURE
5 TEST RESULTS AND ANALYSIS
6 CONCLUSIONS
REFERENCES
Experimental study on comprehensive performance of retractable vertical drainage structure
1 INTRODUCTION
2 MATERIALS AND EQUIPMENT
3 TEST METHODS
4 RESULTS AND DISCUSSION
5 CONCLUSION
REFERENCES
Research and test on thermal function maintenance template of mass concrete
1 INTRODUCTION
2 TEMPLATE DESIGN
3 TEMPLATE PERFORMANCE TESTING
4 CONCLUSION
ACKNOWLEDGMENT
REFERENCES
Experimental study on flexural behavior of autoclaved aerated concrete
block strengthened with textile-reinforced high ductile concrete
1 INTRODUCTION
2 EXPERIMENTAL PROGRAM
3 EXPERIMENTAL RESULTS AND DISCUSSIONS
4 CONCLUSION
REFERENCES
Application of expansion joints on the performance of prestressed
reinforced continuous beam bridge considering the
temperature effect
1 INTRODUCTION
2 THE IMPACT OF DEFORMATION CAUSED BY ENVIRONMENTAL FACTORS
3 THE MODEL OF JOINTS IN DEFERENT SPANS OF THE PRESTRESSED CONCRETECONTINUOUS BEAM BRIDGE
4 CONCLUSION
REFERENCES
Fatigue parameter index analysis of steel-concrete composite beams
1 INTRODUCTION
2 METHOD OF CALCULATING DEFORMATION OF COMPOSITE BEAMS
3 MODEL VALIDATION
4 PARAMETER INDEX ANALYSIS OF THE COMPOSITE BEAM
5 CONCLUSION
REFERENCES
Geopolymers as repair materials in civil engineering: Bibliometric analysis based on cite space
1 INTRODUCTION
2 BASIC RESEARCH ON GEOPOLYMERS
3 RESEARCH STATUS OF GEOPOLYMERS AS REPAIR MATERIALS
4 SUMMARY AND OUTLOOK
REFERENCES
Influence of mass ratio and stiffness ratio on whipping effect of multi-degree-of-freedom system
1 INTRODUCTION
2 MODAL ANALYSIS OF MULTI-DEGREE-OF-FREEDOM SYSTEM
3 NUMERICAL EXAMPLE OF TEN-DEGREE-OF-FREEDOM DAMPED SYSTEM
4 CONCLUSION
5 LIMITATIONS AND NEXT RESEARCH
REFERENCES
High-temperature condition impact on tensile strength of typical steel grade
1 INTRODUCTION
2 EXPERIMENTAL RESULTS AND DATA ANALYSIS TOOL
3 DATA PROCESSING
4 INFLUENCING FACTORS OF STRENGTH DETERIORATION DUETO TEMPERATURE
5 CONCLUSION AND FUTUREWORK
REFERENCES
Study on road performance of mechanical foamed warm-mix rubber-modified SMA asphalt mixture
1 INTRODUCTION
2 EXPERIMENT MATERIAL
3 ROAD PERFORMANCE
4 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Experimental research on silica fume exciting steel slag and ground granulated blast-furnace slag to solidify soft soil
1 INTRODUCTION
2 MATERIALS, PROGRAM, AND PROCESSES
3 RESULT AND DISCUSSIONS
4 CONCLUSIONS
ACKNOWLEDGMENT
REFERENCES
Numerical study of lateral breakout resistance for shallow-embedded pipeline in sand
1 INTRODUCTION
2 VERIFICATION
3 NUMERICAL RESULT
4 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Analysis and design of coupled heat and moisture performance of new self-insulation blocks of recycled ceramsite concrete
1 INTRODUCTION
2 PHYSICAL MODEL
3 MATHEMATICAL MODEL AND CONDITIONS SETTING
4 MODEL SOLVING
5 OPTIMIZATION FOR HOLE TYPES
6 CONCLUSIONS
REFERENCES
Electrical conductivity of asphalt concrete containing carbon fiber and graphene
1 INTRODUCTION
2 EXPERIMENTAL
3 TEST RESULTS AND DISCUSSIONS
4 CONCLUSION
ACKNOWLEDGMENT
REFERENCES
Mechanical characteristics of municipal solid waste incineration bottom ash based on triaxial tests
1 INTRODUCTION
2 EXPERIMENTAL MATERIALS AND METHODS
3 RESULTS OF TRIAXIAL TESTS AND ANALYSES
4 CONCLUSIONS
REFERENCES
Establishment and dynamic analysis of train-track coupling model for high-speed railway
1 INTRODUCTION
2 ESTABLISHMENT OF BALLASTLESS TRACK AND TRAIN MODEL
3 DYNAMIC ANALYSIS AND VERIFICATION OF TRAIN-TRACK COUPLING MODEL
4 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Study on the influencing factors of sulfate attack performance of shotcrete under dry-wet cycle
1 INTRODUCTION
2 EXPERIMENTS
3 RESULTS AND DISCUSSION
4 CONCLUSIONS
REFERENCES
Mechanical performance analysis on castellated beam-column (H-shaped) weak axis end-plate connections under monotonic loading
1 INTRODUCTION
2 FINITE ELEMENT MODEL
3 PARAMETRIC ANALYSIS
4 CONCLUSIONS
REFERENCES
Experimental study on the load-bearing performance of cantilevered circular occlusion pile enclosure structure
1 INTRODUCTION
2 PROJECT OVERVIEW
3 EXPERIMENTAL OVERVIEW
4 TEST RESULTS AND THEIR ANALYSIS
5 CONCLUSIONS
REFERENCES
Experimental study on bending stiffness of oil-filled pipeline
1 INTRODUCTION
2 EXPERIMENTAL MATERIALS
3 EXPERIMENTAL DEVICES AND EXPERIMENTAL PHENOMENA
4 EXPERIMENTAL MODEL AND DATA
5 DISCUSSION BASED ON EXPERIMENTAL RESULTS
ACKNOWLEDGMENT
REFERENCES
Macroscopic and mesoscopic correlations in granular materials based on rolling resistance linear contact model
1 INTRODUCTION
2 ROLLING RESISTANCE LINEAR CONTACT MODEL
3 NUMERICAL RESULTS
4 CONCLUSIONS
ACKNOWLEDGEMENT
REFERENCES
Numerical study on mechanical behaviors of sandstone containing
pre-existing single fissures with different dip angles under uniaxial
compression
1 INTRODUCTION
2 UNIAXIAL COMPRESSION TEST
3 ANALYSIS OF UNIAXIAL COMPRESSION TEST RESULTS
4 UNIAXIAL COMPRESSION PARTICLE FLOW SIMULATION OF JOINTED ROCKMASS
5 ANALYSIS OF NUMERICAL SIMULATION RESULTS
6 CONCLUSION
ACKNOWLEDGEMENTS
REFERENCES
Experimental study on improvement of water stability of phosphogypsum stabilized red clay
1 INTRODUCTION
2 RAW MATERIAL PROPERTIES
3 MIXTURE RATIO DESIGN
4 TEST METHOD
5 RESULT ANALYSIS
6 CONCLUSION AND OUTLOOK
ACKNOWLEDGMENT
REFERENCES
Study on loess degradation and high fill slope deformation evolution mechanism based on model test
1 INTRODUCTION
2 PROJECT OVERVIEW
3 DRY AND WET CYCLE MODEL TEST
4 DISCUSSION
5 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Study on the anti-aging properties of TiO2/basalt modified asphalt
1 INTRODUCTION
2 METHOD
3 EXPERIMENTATION RESULTS AND DISCUSSION
4 CONCLUSION
REFERENCES
Design and operation simulation of a kind of acoustic wooden sound absorption board
1 INTRODUCTION
2 BASIC COMPOSITION OF ACOUSTICWOOD SOUND ABSORPTION BOARD
3 WORKING PROCESS AND PRINCIPLE OF ACOUSTICWOOD SOUNDABSORPTION BOARD
4 THE BENEFICIAL EFFECT OF ACOUSTICWOOD SOUND ABSORPTION BOARD
5 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Fire resistance analysis of profiled steel sheeting-concrete composite slab
1 INTRODUCTION
2 FIRED MODEL OF COMPOSITE SLAB
3 DISCUSSION OF THE RESULT
4 CONCLUSIONS
REFERENCES
Experimental study on grout reinforcement mechanism in deep fractured mudstone
1 INTRODUCTION
2 MATERIAL AND METHOD
3 EXPERIMENTAL RESULTS
4 DISCUSSION
5 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Experimental study on the damage of reinforced concrete columns under explosion load
1 INTRODUCTION
2 EXPERIMENTS SETUP
3 TEST RESULTS
4 RESULTS AND DISCUSSION
REFERENCES
Viscoelastic peridynamic theory of concrete and its application
1 INTRODUCTION
2 VISCOELASTIC PERIDYNAMIC THEORY
3 CALIBRATION METHOD OF MATERIAL PARAMETERS
4 EXAMPLES
5 CONCLUSION
ACKNOWLEDGMENT
REFERENCES
Study of the feasibility of using gangue as a concrete aggregate
1 INTRODUCTION
2 EXPERIMENTAL PROGRAM
3 RESULTS AND DISCUSSION
4 CONCLUSIONS
ACKNOWLEDGEMENTS
REFERENCES
Design and mechanical properties analysis of lightweight polymer composite plate
1 INTRODUCTION
2 DESIGN OF COMPOSITE STRUCTURE
3 MATERIALS AND TESTS
4 RESULTS AND DISCUSSION
5 CONCLUSIONS
REFERENCES
Simulation analysis of the force performance of the SRC Cantilever beam in the transition layer
1 INTRODUCTION
2 FINITE ELEMENT SIMULATION ANALYSIS
3 SIMULATION RESULTS AND DISCUSSION
4 CONCLUSIONS
REFERENCES
Study on fracture evolution law of red clay stabilized by high content phosphogypsum
1 INTRODUCTION
2 PROPERTIES OF RAW MATERIALS
3 TEST PLAN
4 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Study of the influence of pore structure characteristics on the properties of recycled fine aggregate concrete
1 INTRODUCTION
2 TEST OVERVIEW
3 TEST RESULTS AND DISCUSSION
4 CONCLUSIONS
5 DEFICIENCY AND PROSPECT
REFERENCES
Research on static test of modular steel structure beam-column joint
1 INTRODUCTION
2 OVERVIEW OF THE TRIAL
3 EXPERIMENT RESULT AND ANALYSIS
4 CONCLUSIONS AND RECOMMENDATIONS
ACKNOWLEDGMENT
REFERENCES
Analysis on influencing factors of shear mechanical properties of segmental beam joints
1 INTRODUCTION
2 ANALYSIS OF INFLUENCING FACTORS OF JOINT SHEAR RESISTANCE
3 CONCLUSIONS
REFERENCES
Study on preparation and modification of synchronous grouting material with waste fine sand slag by shield method
1 INTRODUCTION
2 TEST RAW MATERIALS AND TEST METHODS
3 TEST RESULTS AND DISCUSSION
4 CONCLUSIONS
REFERENCES
Study on the mechanical properties of single spherical friction pendulum supports under different parameters
1 INTRODUCTION
2 COMPOSITION AND PRINCIPLE OF FRICTION PENDULUM SUPPORT
3 ABAQUS MODEL IS ESTABLISHED
4 SIMULATION RESULTS ARE ANALYZED AND VERIFIED
5 CONCLUSION
REFERENCES
Study on thermal performance of new building energy-saving wall insulation materials
1 INTRODUCTION
2 CLASSIFICATION OF BUILDINGWALL THERMAL INSULATION MATERIALS
3 RESEARCH METHOD OF THERMAL PERFORMANCE OF NEW BUILDINGENERGY-SAVINGWALL INSULATION MATERIALS
4 ANALYSIS OF HEAT TRANSFER PRINCIPLE OF NEW BUILDING ENERGY-SAVINGWALL INSULATION MATERIAL
5 THERMAL PERFORMANCE ANALYSIS OF NEW BUILDING ENERGY-SAVINGWALLINSULATION MATERIALS
6 CONCLUSION
REFERENCES
Numerical simulation on shear performance of high-strength bolted connections in steel-concrete composite beams
1 INTRODUCTION
2 FINITE ELEMENT MODEL
3 PARAMETRIC ANALYSIS
4 CALCULATION FORMULA OF SHEAR CAPACITY OF HIGH STRENGTH BOLTS
5 CONCLUSION
REFERENCES
Numerical simulation on cyclic behaviour of high strength bolt shear connector
1 INTRODUCTION
2 PUSH-OUT TEST SPECIMENS
3 FINITE ELEMENT MODELING METHOD
4 FINITE ELEMENT SIMULATION RESULTS
5 CONCLUSION
REFERENCES
In-operation experimental research on fatigue characteristics of orthotropic deck
1 INTRODUCTION
2 TEST MODEL DESIGN
3 MODEL LOADING SCHEME
4 TEST RESULTS AND ANALYSIS
5 CONCLUSION
ACKNOWLEDGMENT
REFERENCES
Construction engineering and tunnel excavation technology
Design and research of prefabricated building construction collaborative management system based on BIM technology
1 INTRODUCTION
2 DESIGN OF COLLABORATIVE MANAGEMENT SYSTEM BASED ON BIM
3 SYSTEM TESTING
4 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Equivalent bilinear SDOF system of fabricated concrete shear wall structure
1 INTRODUCTION
2 EQUIVALENT SDOF SYSTEM AND CHARACTERISTIC PARAMETERS
3 NONLINEAR DYNAMIC ANALYSIS
4 SUMMARY AND CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Finite element simulations for failure of shield tunnel face using shear hardening plasticity model
1 INTRODUCTION
2 SHEAR HARDENING PLASTICITY MODEL
3 NUMERICAL SIMULATION OF TUNNEL FACE FAILURE
4 CONCLUSION
ACKNOWLEDGMENT
REFERENCES
Effects of scour on natural frequency of offshore wind turbines and engineering treatment measures
1 INTRODUCTION
2 NUMERICAL ANALYSIS METHOD OF NATURAL FREQUENCY
3 ANALYSIS OF THE EFFECT OF SCOUR HOLES ON THE NATURAL FREQUENCY
4 ENGINEERING TREATMENT MEASURES FOR SERIOUS SCOUR
5 CONCLUSION
FUNDING
REFERENCES
FTA–AHP analysis of flying rock damage equipment and optimization of roadway blasting scheme
1 INTRODUCTION
2 ANALYSIS METHOD OF FTA–AHP
3 COMPREHENSIVE ANALYSIS OF BLASTING FLYING ROCK ACCIDENT
4 OPTIMIZED BLASTING PLAN AND TEST
5 CONCLUSION
REFERENCES
Research on optimization of tunnel gallery ventilation system in Xinglong Tunnel
1 INTRODUCTION
2 PROJECT SUMMARY
3 NUMERICAL MODEL
4 CALCULATION RESULTS AND ANALYSIS
5 VENTILATION OPTIMIZATION
6 CONCLUSION
REFERENCES
Existing tunnel maintenance management based on life cycle
1 INTRODUCTION
2 BASIC THEORY
3 CASE STUDIES
4 CONCLUSIONS
REFERENCES
Study on construction control of expressway prestressed concrete continuous beam bridge
1 INTRODUCTION
2 PROJECT OVERVIEW
3 ESTABLISHMENT OF A FINITE ELEMENT MODEL
4 CANTILEVER CONSTRUCTION STAGE
5 FULL-BRIDGE CLOSURE STAGE
6 CONCLUSION
REFERENCES
Risk assessment of construction progress based on building information & critical chain method
1 INTRODUCTION
2 OVERVIEW OF BIM TECHNOLOGY AND CCM
3 EVALUATION SYSTEM OF BIM-CCM IN BUILDING CONSTRUCTIONSCHEDULE RISK
4 CASE STUDY
5 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Study on mechanical behavior of large section tunnel with three-bench-seven-step excavation method
1 INTRODUCTION
2 MODEL TEST ON DEFORMATION CHARACTERISTICS OF LARGE SECTIONTUNNEL CONSTRUCTION
3 STUDY ON MECHANICAL PROPERTIES OF LARGE SECTION TUNNEL SUPPORTSTRUCTURE
4 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Research on concrete perfusion technology of arch rib steel tube of Nalao Bridge in Pingguo County
1 INTRODUCTION
2 ENGINEERING OVERVIEW
3 ARCH RIB C50 CONCRETE RAW MATERIALS AND MIX RATIO
4 PERFUSION CONSTRUCTION SCHEME
5 CONSTRUCTION QUALITY CONTROL
6 PERFUSION QUALITY TEST RESULTS
7 CONCLUSION
REFERENCES
Research on arch effect of high and steep slope asphalt concrete core dam based on ABAQUS
1 INTRODUCTION
2 RESEARCH SCHEME AND FINITE ELEMENT MODEL
3 RESULTS AND ANALYSIS
4 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Application study and construction design of trestle ofWaisha Bridge
1 INTRODUCTION
2 PROJECT OVERVIEW AND ANALYSIS OF KEY AND DIFFICULT POINTS
3 CONSTRUCTION TECHNOLOGY RESEARCH
4 IMPLEMENTATION AND APPLICATION EFFECT
5 CONCLUSION
REFERENCES
Field test and study on construction ventilation of small-radius spiral tunnels
1 INTRODUCTION
2 OVERVIEW OF SPIRAL TUNNEL PROJECT
3 FIELD TEST
4 ANALYSIS OF FIELD TEST RESULTS
5 CONCLUSION
REFERENCES
Optimization analysis of excavation support parameters for deep foundation pits in common wall sections of existing metro statio
1 INTRODUCTION
2 ESTABLISHMENT OF THE THREE-DIMENSIONAL NUMERICAL MODEL
3 OPTIMAL SOLUTION DESIGN BASED ON THE ORTHOGONAL TEST METHOD
4 ANALYSIS OF ORTHOGONAL TEST RESULTS AND SELECTION OF OPTIMALSOLUTION
5 COMPARISON OF BEFORE AND AFTER OPTIMISATION OF SUPPORTPARAMETERS
6 CONCLUSION
REFERENCES
Research on timber construction based on robot arm technology
1 INTRODUCTION
2 RESEARCH METHOD
3 PRACTICE RESEARCH PROCESS
4 CONCLUSIONS
ACKNOWLEDGMENT
REFERENCES
Treatment technology and verification of shield tunneling through large-scale anchor cable group
1 INTRODUCTION
2 PROJECT OVERVIEW
3 ANCHOR TREATMENT CONSTRUCTION TECHNOLOGY AND CONTROLMEASURES
4 ANALYSIS OF DRIVING PARAMETERS
5 TOOL WEAR ANALYSIS
6 SURFACE SETTLEMENT ANALYSIS
7 CONCLUSIONS
REFERENCES
Research on application of non-support replacement concrete technology for the shear wall of a high-rise building
1 INTRODUCTION
2 INTERNAL FORCE CALCULATION OF SHEARWALL STRUCTURE
3 FINITE ELEMENT SIMULATION
4 SCHEME IMPLEMENTATION
5 CONCLUSIONS AND RESEARCH PROSPECT
REFERENCES
Analysis on strength and microscopic homogeneity of cement stabilized macadam mixture based on vibration mixing
1 INTRODUCTION
2 MATERIALS
3 DESIGNED COMPOSITION
4 STRENGTH COMPARISON
5 SEM ANALYSIS
6 CONCLUSIONS
ACKNOWLEDGEMENT
REFERENCES
On application of green building technology in Natatorium of Hangzhou Huanglong Sports Centre
1 INTRODUCTION
2 LAND SAVING AND OUTDOOR ENVIRONMENT
3 ENERGY-SAVING AND UTILIZATION
4 WATER-SAVING ANDWATER RESOURCES UTILIZATION
5 MATERIAL SAVING AND UTILIZATION OF MATERIAL RESOURCES
6 INDOOR ENVIRONMENTAL QUALITY
7 OPERATION MANAGEMENT
8 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Study on dynamic response of shield segment to approach blasting of connected aisle
1 INTRODUCTION
2 PROJECT OVERVIEW
3 MONITORING PROGRAM
4 MONITORING RESULTS AND ANALYSIS
5 CONCLUSION
REFERENCES
Analysis of construction process of space grid steel structure of saddle-arch combination type
1 INTRODUCTION
2 PROJECT SUMMARY
3 THE ESTABLISHMENT OF THE FINITE ELEMENT MODEL
4 DESIGN STATE ANALYSIS OF SPATIAL GRID STRUCTURE
5 SIMULATION AND ANALYSIS OF CONSTRUCTION PROCESS OF SPATIAL GRIDSTRUCTURE UNDER TEMPORARY SUPPORT
6 SIMULATION AND ANALYSIS OF CONSTRUCTION PROCESS OF REMOVINGTEMPORARY SUPPORT AFTER FORMING SPATIAL GRID STRUCTURE
7 RESULTS OF SIMULATION ANALYSIS
8 FURTHER RESEARCH
REFERENCES
Causes analysis and repair methods of concrete cracks in aqueducts
1 INTRODUCTION
2 CAUSES OF CRACK FORMATION
3 SOLUTIONS TO CRACKS
4 EFFECTS OF CRACK TREATMENT
5 CONCLUSION
REFERENCES
Application of lattice anchor rod in high and steep slope support
1 INTRODUCTION
2 PROJECT OVERVIEW
3 NUMERICAL SIMULATION CALCULATION AND ANALYSIS OF HIGH AND STEEPSLOPES
4 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Influence analysis of foundation pit construction of a subway station in Nanchang on shield tunnel and adjacent buildings
1 INTRODUCTION
2 PROJECT OVERVIEW
3 ANALYSIS OF THE INFLUENCE OF DEEP FOUNDATION PIT OF SUBWAY STATIONON SURROUNDING BUILDINGS
4 COMPARATIVE ANALYSIS OF FINITE ELEMENT NUMERICAL CALCULATION ANDACTUAL MONITORING DATA
5 CONCLUSION
ACKNOWLEDGMENTS
REFERENCES
Seepage analysis of Chuanqin diversion tunnel under the condition of deep well dewatering
1 INTRODUCTION
2 ANALYSIS MODEL OF DIVERSION TUNNEL
3 RESULT ANALYSIS
4 CONCLUSIONS
ACKNOWLEDGMENTS
REFERENCES
Study on the response of surrounding rock with buried depth and rock grade in tunneling
1 INTRODUCTION
2 PROJECT OVERVIEW AND MODEL ESTABLISHMENT
3 EVOLUTION LAW OF DISPLACEMENT FIELD IN SURROUNDING ROCK DURINGTUNNEL EXCAVATION
4 RESPONSE LAW OF SURROUNDING ROCK DEFORMATION OF THE EXCAVATEDTUNNEL WITH BURIED DEPTH
5 RESPONSE LAW OF SURROUNDING ROCK DEFORMATION WITH SURROUNDINGROCK GRADE IN EXCAVATED TUNNEL
6 CONCLUSION
REFERENCES
Effect of coefficient of charge distance on the vibration response law of buildings in tunnel blasting
1 INTRODUCTION
2 NUMERICAL SIMULATION MODELING
3 NUMERICAL SIMULATION ANALYSIS
4 CONCLUSIONS
REFERENCES
Optimization of large span portal frame structure with tapered sections
1 INTRODUCTION
2 ANSYS PARAMETRIC DESIGN AND OPTIMIZATION METHODS
3 AN EXAMPLE OF OPTIMAL DESIGN OF THE PORTAL FRAME
4 CONCLUSION
REFERENCES
An analysis of the reliability of wave overtopping volumes of sloping seawalls
1 INTRODUCTION
2 RESEARCH PROCESS
3 THE CALCULATION OF THE FAILURE PROBABILITY OFWAVE OVERTOPPINGVOLUMES OF SEAWALLS UNDER THE CONDITION OF THE ALLOWABLEOVERTOPPINGWAVES
4 CONCLUSION
REFERENCES
Research on influencing factors of ventilation and cooling effect in high geotemperature tunnel
1 INTRODUCTION
2 PROJECT OVERVIEW
3 VENTILATION NUMERICAL SIMULATION
4 NUMERICAL SIMULATION RESULTS AND ANALYSIS
5 CONCLUSIONS
REFERENCES
Research on nondestructive detection and trenchless treatment of abutment slab void
1 INTRODUCTION
2 PROJECT OVERVIEW
3 ENGINEERING APPLICATION FOR DETECTING VOIDS IN BRIDGEHEADS
4 ENGINEERING IMPLEMENTATION MEASURES
5 CONCLUSIONS
REFERENCES
Research on response of water transmission pipeline crossing fault zone in HanWei River diversion project
1 INTRODUCTION
2 CALCULATION THEORY OFWATER PIPELINE ACROSS FAULT ZONE
3 PROJECT OVERVIEW AND MODEL ESTABLISHMENT
4 DEFORMATION AND FORCE ANALYSIS
5 CONCLUSIONS
FUND PROJECT
REFERENCES
Study on curing technology of prefabricated concrete components
1 INTRODUCTION
2 TEST OVERVIEW
3 MECHANISM ANALYSIS
4 CONCLUSIONS
5 DEFICIENCY AND PROSPECT
REFERENCES
Study on construction quality management of asphalt concrete pavement
1 INTRODUCTION
2 ASPHALT CONCRETE PERFORMANCE REQUIREMENTS
3 DEVELOPMENT OF QUALITY MANAGEMENT MODE
4 ANALYSIS OF QUALITY INFLUENCING FACTORS
5 CONSTRUCTION QUALITY CONTROL INDEX AND MEASURES
6 RESULTS OF CONSTRUCTION QUALITY MANAGEMENT
7 CONCLUSION
ACKNOWLEDGMENT
REFERENCES
Technology research and application of immersed tunnel underwater detection
1 INTRODUCTION
2 DETECTION ITEMS AND METHODS
3 ENGINEERING APPLICATION
4 CONCLUSIONS
ACKNOWLEDGEMENT
REFERENCES
Research on isometric model test of sand foundation of immersed tunnel
1 INTRODUCTION
2 SAND AND PRESSING MODEL TEST
3 DATA ANALYSIS OF SAND COMPACTION TEST WITH ISOMETRIC MODEL
4 PRE-LIFT TEST
5 CONCLUSION AND PROSPECT
REFERENCES
Analysis of the runoff and seepage drainage effects of prefabricated roof double-layer drainage system
1 INTRODUCTION
2 PREFABRICATED ROOF’S DOUBLE-LAYER DRAINAGE SYSTEM
3 RUNOFF DRAINAGE SOLUTION FOR PREFABRICATED ROOF DOUBLE-LAYERDRAINAGE CONSTRUCTION SYSTEM
4 ANALYSIS OF THE SEEPAGE DRAINAGE EFFECT OF PREFABRICATED ROOFDOUBLE-LAYER DRAINAGE SYSTEM
ACKNOWLEDGMENTS
REFERENCES
Application of viscous damper in vibration reduction of steel tube concrete special-shaped arch bridge
1 INTRODUCTION
2 CALCULATION MODEL OF CFST-SHAPED ARCH BRIDGE
3 SEISMIC RESPONSE REDUCTION THEORY FOR BRIDGES
4 SEISMIC RESPONSE ANALYSIS OF STEEL-TUBE CONCRETE-SHAPED ARCHBRIDGE
5 ANALYSIS OF THE RESPONSE OF STEEL-TUBE CONCRETE-SHAPED ARCHBRIDGES UNDER THE ACTION OF AUTOMOBILE BRAKING FORCE
6 CONCLUSION
REFERENCES
A method for line-shape and suspender force control of tied-arch bridges based on stress-free state theory
1 INTRODUCTION
2 CONTROL OF ARCH BRIDGES INSTALLATION BASED ON STRESS-FREESTATE THEORY
3 INFLUENCE MATRIX-BASED METHOD FOR ADJUSTING THE SUSPENSION RODSOF ARCH BRIDGES
4 EXAMPLE ANALYSIS
5 CONCLUSIONS
ACKNOWLEDGEMENTS
REFERENCES
Author index