✦ LIBER ✦

Advanced numerical simulation of liquid composite molding for process analysis and optimization

✍ Scribed by François Trochu; Edu Ruiz; Vincent Achim; Sofiane Soukane

Book ID: 116378191
Publisher: Elsevier Science
Year: 2006
Tongue: English
Weight: 858 KB
Volume: 37
Category: Article
ISSN: 1359-835X
DOI: 10.1016/j.compositesa.2005.06.003

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of meshing on the numerical si

Influence of meshing on the numerical simulation of liquid composite molding processes

✍ Chensong Dong 📂 Article 📅 2011 🏛 Springer Netherlands 🌐 English ⚖ 764 KB

Adaptive geometry and process optimizati

Adaptive geometry and process optimization for injection molding using the kriging surrogate model trained by numerical simulation

✍ Yuehua Gao; Lih-Sheng Turng; Xicheng Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 575 KB

Process optimization and effects of mate

Process optimization and effects of material properties on numerical prediction of warpage for injection molding

✍ Yuehua Gao; Lih-Sheng Turng; Xicheng Wang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 530 KB

Curing kinetics of medium reactive unsat

Curing kinetics of medium reactive unsaturated polyester resin used for liquid composite molding process

✍ Raghu Raja Pandiyan K.; Saikat Chakraborty; Gautam Kundu; Swati Neogi 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 127 KB 👁 2 views

## Abstract The cure kinetics of medium reactivity unsaturated polyester resin formulated for Liquid Composite Molding process simulation was studied by Differential Scanning Calorimetry (DSC) under isothermal conditions over a specific range of temperature. For isothermal curing reactions performe

A process performance index based on gat

A process performance index based on gate-distance and incubation time for the optimization of gate locations in liquid composite molding processes

✍ F. Sánchez; J.A. García; F. Chinesta; Ll. Gascón; C. Zhang; Z. Liang; B. Wang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 961 KB

Numerical Simulation of the Powder Injec

Numerical Simulation of the Powder Injection Moulding Process for Optimization of Mould Design and Process Parameters

✍ V. V. Bilovol; L. Kowalski; J. Duszczyk 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 246 KB 👁 2 views