Adsorptive removal of textile dyes from aqueous solutions by dead fungal biomass
β Scribed by Dilek Asma; Sibel Kahraman; Seval Cing; Ozfer Yesilada
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 72 KB
- Volume
- 46
- Category
- Article
- ISSN
- 0233-111X
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Dead fungal biomass prepared from Phanerochaete chrysosporium and Funalia trogii was tested for their efficiency in removal of textile dyes. The effects of contact time, initial dye concentration, amount of dead biomass and agitation rate on dye removal have been determined. Removal of all dyes required a very short time (60 min). Experimental results show that, P. chrysosporium was more effective than F. trogii . An increase in the amount of dead biomass positively affected of the dye removal. The removal efficiency of different amount of biomass was in order 1 g > 0.5 g > 0.2 g > 0.1 g. The highest removal was obtained at 150β200 rpm. Slightly lower removing activities were found at lower agitation rates. This study showed that it was possible to remove textile dyes by dead biomass of P. chrysosporium . (Β© 2006 WILEYβVCH Verlag GmbH & Co. KGaA, Weinheim)
π SIMILAR VOLUMES
Direct Red 31, Acid Black 1 and Acid Green 16 belonging to diazo and triphenylmethane classiΓΌcation of dye chemicals are widely used during the manufacture of leather. The spent dyestuΓΎ s in wastewater escape biological treatment owing to their poor biodegradability. An adsorption procedure was used
## Abstract __Staphylococcus aureus__ has not been used to remove Cr(VI) ions from aqueous solutions. In the present study, biosorption experiments for Cr(VI) were investigated using __S. aureus__ biomass isolated from activated sludge, Lianyungang Dapu sewage treatment plant, China. The effects of
## Abstract Phenolic compounds are one of the most representative pollutants in industrial wastewater, and efficient removals of them have attracted significant concerns. In this study, several commercial and new synthetic polymers (acrylonitrile, 1,3βbutadiene, and styrene copolymer (ABS), styrene