✦ LIBER ✦

Adsorption unit for air separation

✍ Scribed by A. M. Arkharov; Yu. V. Nikiforov; V. I. Rodionov

Publisher: Springer
Year: 1984
Tongue: English
Weight: 224 KB
Volume: 20
Category: Article
ISSN: 0009-2355
DOI: 10.1007/bf01149048

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Repressurization of adsorption purifiers

Repressurization of adsorption purifiers for cryogenic air separation

✍ Gregory R. Schoofs; P. Petit 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 761 KB

The repressurization and adsorption steps of a molecular sieve adsorption purifier upstream of a cryogenic air separation unit was analyzed with a one-dimensional equilibrium-stage model. Numerical solution of the differential mass and energy balances predicts that the ef3uent gas composition is bri

New-generation air separation units

✍ V. A. Garin; Yu. G. Pisarev 📂 Article 📅 1996 🏛 Springer 🌐 English ⚖ 622 KB

Air liquide builds air separation unit i

Air liquide builds air separation unit in South Texas

📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 116 KB

Air separation by pressure swing adsorpt

Air separation by pressure swing adsorption

✍ D.M. Ruthven; S. Farooq 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 819 KB

Complete separation conditions for a loc

Complete separation conditions for a local equilibrium TCC adsorption unit

✍ Anthony S. T. Chiang 📂 Article 📅 1998 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 716 KB

A new technique presented can offer analytical solutions for the local equilibrium true countercurrent model to study the simulated moving-bed (SMB) separation process. This equilibrium theory could be vey useful for predicting both optimal and robust operation conditions for the SMB separation proc

Exergy analysis of pressure swing adsorp

Exergy analysis of pressure swing adsorption processes for air separation

✍ R. Banerjee; K.G. Narayankhedkar; S.P. Sukhatme 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 767 KB

Pressure swing adsorption cycles for the production of oxygen from air have been analysed for equilibrium separations, using the method of exergy analysis. The optimum operating point has been determined and individual component losses identified. A modified cycle incorporating a pressure equalisati