𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Adsorption of some solutes on heat-treated meso-carbon microbeads treated by plasma

✍ Scribed by K. Esumi; Y. Kimura; T. Nakada; K. Megurao; H. Honda


Publisher
Elsevier Science
Year
1989
Tongue
English
Weight
368 KB
Volume
27
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Adsorption of Pb2+ by heat-treated and s
✍ A. MacΓ­as-GarcΓ­a; C. Valenzuela-Calahorro; V. GΓ³mez-Serrano; A. EspΓ­nosa-Mansill πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 753 KB

Using activated carbon (AC) and samples obtained by heat and sulfurizing treatments of the material, the adsorption of Pb\*+ from aqueous solution was studied at two pH values and at three temperatures in the range 2%45Β°C. Adsorbents were prepared either by heat treatment of AC from 30 to 900Β°C in N

Adsorption Study of Methane on Activated
✍ Xiao-Hong Shao; Shi-Ping Huang; Zhi-Gang Shen; Jian-Feng Chen πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 440 KB

## Abstract A combined method of density functional theory (DFT) and statistics integral equation (SIE) for the determination of the pore size distribution (PSD) is developed based on the experimental adsorption data of nitrogen on activated mesocarbon microbead (AMCMB) at 77 K. The pores of AMCMB

The adsorption of vapours by activated a
✍ R.H Bradley; B Rand πŸ“‚ Article πŸ“… 1993 πŸ› Elsevier Science 🌐 English βš– 407 KB

Data for water adsorption at 293 K by an activated series and a heat-treated series of PVDC based carbons are reported. Type 5 (BDDT) isotherms were obtained for adsorption by each carbon. Total water adsorption volumes (a,) are lower than total pore volumes and Dubinin-Radushkevich micropore volume

On the Adsorption, by Activated Carbons,
✍ Deirdre Hugi-Cleary; Abdou Slasli; Fritz Stoeckli πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 German βš– 77 KB πŸ‘ 2 views

## Abstract Activated carbons play an important role in the purification of air and of water. Whereas vapors are adsorbed by a micropore filling process, the removal of sparingly soluble species such as phenol and its derivatives is limited to the coating of the effective surface of the material. T