The kinetics and mechanism of adsorption of two commercial dyes (BR22, AB25), phenol, and 3-chlorophenol from water on activated carbons were studied at 30 • C. The activated carbons were prepared from plum kernels, and the activation temperature and time tested were in the ranges 750-900 • C and 1-
Adsorption of dyes and humic acid from water using chitosan-encapsulated activated carbon
✍ Scribed by Feng-Chin Wu; Ru-Ling Tseng; Ruey-Shin Juang
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 2002
- Tongue
- English
- Weight
- 185 KB
- Volume
- 77
- Category
- Article
- ISSN
- 0268-2575
- DOI
- 10.1002/jctb.705
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The adsorption isotherms and rates of two dyes and humic acid from aqueous solutions onto chitosan‐encapsulated activated carbon (CEAC) beads were measured at 30 °C. Such beads were prepared by mixing different weight percents of cuttlefish‐based chitosan (100%, 80%, 67%, and 55%) and rice‐based activated carbons. It was shown that the isotherms of dyes and humic acid were well fitted by the Freundlich equation. The adsorption capacity and rate could be enhanced when activated carbon was encapsulated with chitosan. Four simplified kinetic models including the pseudo‐first‐order equation, pseudo‐second‐order equation, intraparticle diffusion model, and the Elovich equation were tested to follow the adsorption processes. The adsorption of dyes was best described by the Elovich equation, but that of humic acid was best described by the intraparticle diffusion model. The kinetic parameters of each best‐fit model were calculated and are discussed in this paper.
© 2002 Society of Chemical Industry
📜 SIMILAR VOLUMES
The effect of the zeta \((\zeta)\) potential of activated carbon on the adsorption of cationic dyes from aqueous solution has been studied. The \(\mathrm{pH}_{\mathrm{zpc}}\) of the zero-point charge of activated carbon has been measured by microelectrophoresis. Plots of saturated amount adsorbed fo
The hydrophobic micropores of active carbon were filled with the four adsorption parameters could be determined by a a mixture of water and ethanol by adsorbing their mixed vapors combination of volumetric and gravimetric methods, if the (H 2 O/EtOH Å 3/1) on active carbon. The desorption isotherm o
The automatic adsorption apparatus has been developed to measure the individual adsorption isotherms of constituent vapor from binary mixed vapor. The present adsorption apparatus consists of a combination of gravimetry and volumetry. The weight increase due to gas adsorption was determined by the m