The adsorption characteristics of activated carbon treated with 30 wt% HCl and 30 wt% NaOH were investigated. The acid and base values were determined by Boehm's method and the surface structures were studied by the BET method with N 2 adsorption and iodine adsorption capacity. Also the adsorption p
Adsorption of CO2 and SO2 on activated carbons with a wide range of micropore size distribution
✍ Scribed by M. Molina-Sabio; A.M.A. Muñecas; F. Rodríguez-Reinoso; B. McEnaney
- Publisher
- Elsevier Science
- Year
- 1995
- Tongue
- English
- Weight
- 549 KB
- Volume
- 33
- Category
- Article
- ISSN
- 0008-6223
No coin nor oath required. For personal study only.
✦ Synopsis
The adsorption isotherms of N, at 77K, CO, at 251, 273 and 298K, and SO, at 262 and 273K have been determined on a series of physically activated carbons with a wide range of micropore size distributions. Since the series includes carbons with very high burn-off, it shows the problems involved in the characterization of microporsity in superactivated carbons. On the other hand, the results show that the carbon surface-adsorbate interactions for SO, at low relative pressures are weaker than for N, and CO,, as a result of the strong adsorptive-adsorptive interactions in the bulk gas phase.
📜 SIMILAR VOLUMES
The adsorption and the desorption of SO: on active carbons is studied in relation to the surface characteristics of the carbons. Surface basic groups (with pyronic or pyronic-like structure) greatly increase the adsorption of SO,, that can be divided into two forms. one weakly and the other strongly
The Monte Carlo method is used in its grand ensemble variant in combination with CO(2) experimental isotherm data at low (195.5 K) and high temperatures (at 298 and 308 K, i.e., slightly below and above the CO(2) critical temperature, respectively) to characterize microporous carbons and obtain the
NOTATION inner diameter of fiber, m outer diameter of fiber, m effective fiber wall thickness defined by eq. ( 3), m effective fiber wall thickness defined by eq. ( 14), m fraction of inlet feed directed out through module permeation flux rate, m/s fluid consistency index, Pas" permeability of Newto