## Abstract In this study, adsorption of ammonia on activated carbon from aqueous solutions has been studied in a batch stirred cell. Experiments have been carried out to investigate the effects of temperature, ammonia concentration, and activated carbon dose on ammonia adsorption. The experimental
Adsorption Dynamics of Fe(III) from Aqueous Solutions onto Activated Carbon
✍ Scribed by Yavuz Onganer; Çigdem Temur (Işik)
- Publisher
- Elsevier Science
- Year
- 1998
- Tongue
- English
- Weight
- 95 KB
- Volume
- 205
- Category
- Article
- ISSN
- 0021-9797
No coin nor oath required. For personal study only.
✦ Synopsis
Granular activated carbon was utilized as adsorbent for the removal of Fe(III) ions from aqueous solutions at different temperatures and fixed pH. The batch adsorption kinetics has been described by the Lagergren equation which is a pseudo-first-order rate expression; the surface mass transfer coefficients and diffusion coefficients have been calculated at different temperatures. The intraparticle transport of Fe(III) within the pores of activated carbon was found to be the rate-limiting step, while the process of uptake obeyed the Langmuir model of adsorption.
📜 SIMILAR VOLUMES
The adsorption behaviour of Fe(II) and Mn(II) onto bentonite was studied as a function of temperature under optimized conditions of shaking time, amount of adsorbent, pH, and concentration of the adsorbate. Thermodynamic parameters such as H o and S o were calculated from the slope and intercept of
## Abstract Recently a new form of activated carbon has appeared: carbon aerogel (CA). Its use for the removal of inorganic (and especially metal ions) has not been studied. In the present study, the adsorption of three metal ions, Hg(II), Pb(II) and Ni(II), onto carbon aerogel has been investigate
## Abstract Activated carbon prepared from __Eichhornia__ was used for the adsorptive removal of Pb(II) from aqueous solution. As the raw material for the preparation of the activated carbon is an aquatic weed, the production of this carbon is expected to be economically feasible. Parameters such a