Adsorption behavior of reactive dyes from aqueous solutions on chitosan
β Scribed by Ruey-Shin Juang; Ru-Ling Tseng; Feng-Chin Wu; Shwu-Hwa Lee
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 1997
- Tongue
- English
- Weight
- 408 KB
- Volume
- 70
- Category
- Article
- ISSN
- 0268-2575
No coin nor oath required. For personal study only.
β¦ Synopsis
The capability of the use of chitosan for removing vinyl sulfone and chlorotriazine reactive dyes from aqueous solutions was examined, including equilibrium and dynamic studies. Experiments were performed as a function of dye concentration, and the amount and particle size of chitosan. It was shown that the adsorption capacities of chitosan were comparatively high for the three investigated dyes. The equilibrium data could be best Γtted by the RedlichΓ Peterson equation over the entire concentration range (50Γ500 g m~3). A comparison of the adsorption capacity among such adsorbents as chitin and powdered activated carbon was made. Two rate parameters were Γnally obtained to describe the adsorption process on a quantitative basis. These parameters could be well correlated to the amount and particle size of dry chitosan.
π SIMILAR VOLUMES
Direct Red 31, Acid Black 1 and Acid Green 16 belonging to diazo and triphenylmethane classiΓΌcation of dye chemicals are widely used during the manufacture of leather. The spent dyestuΓΎ s in wastewater escape biological treatment owing to their poor biodegradability. An adsorption procedure was used
## Abstract Equilibrium isotherms for the adsorption of phenol from aqueous solutions of three types of Jojoba nuts residue were determined at 30, 40 and 55βΒ°C. Types I and II were the residue after extracting the oil by leaching or by a pressing process, respectively. The third type was obtained b
The adsorption behavior of methacrylic acid-grafted poly(ethylene terephthalate) fibers was studied toward the copper(II) ion in aqueous solutions by a batch equilibriation technique. The influence of treatment time, temperature, pH of the solution, metal ion concentration, and graft yield were cons