[ACM Press the 14th ACM international conference - San Francisco, California, USA (2008.09.14-2008.09.19)] Proceedings of the 14th ACM international conference on Mobile computing and networking - MobiCom '08 - In-band spectrum sensing in cognitive radio networks
β Scribed by Kim, Hyoil; Shin, Kang G.
- Book ID
- 121236397
- Publisher
- ACM Press
- Year
- 2008
- Weight
- 894 KB
- Category
- Article
- ISBN
- 1605580961
No coin nor oath required. For personal study only.
β¦ Synopsis
In a cognitive radio network (CRN), in-band spectrum sensing is essential for the protection of legacy spectrum users, with which the presence of primary users (PUs) can be detected promptly, allowing secondary users (SUs) to vacate the channels immediately. For in-band sensing, it is important to meet the detectability requirements, such as the maximum allowed latency of detection (e.g., 2 seconds in IEEE 802.22) and the probability of mis-detection and false-alarm. In this paper, we propose an efficient periodic in-band sensing algorithm that optimizes sensing-frequency and sensingtime by minimizing sensing overhead while meeting the detectability requirements. The proposed scheme determines the better of energy or feature detection that incurs less sensing overhead at each SNR level, and derives the threshold aRSS threshold on the average received signal strength (RSS) of a primary signal below which feature detection is preferred. We showed that energy detection under lognormal shadowing could still perform well at the average SNR < SN R wall [1] when collaborative sensing is used for its location diversity. Two key factors affecting detection performance are also considered: noise uncertainty and inter-CRN interference. aRSS threshold appears to lie between -114.6 dBm and -109.9 dBm with the noise uncertainty ranging from 0.5 dB to 2 dB, and between -112.9 dBm and -110.5 dBm with 1βΌ6 interfering CRNs.
π SIMILAR VOLUMES
There has been extensive work on network architectures that support multi-path routing to improve performance in wireless mesh networks. However, previous work uses ad-hoc design principles that cannot guarantee any network-wide performance objectives such as conjointly maximizing resource utilizati