ACI 314R-11: Guide to Simplified Design for Reinforced Concrete Buildings

✍ Scribed by ACI Committee 314

Publisher: American Concrete Institute (ACI)
Year: 2011
Tongue: English
Leaves: 136
Category: Library

No coin nor oath required. For personal study only.

✦ Synopsis

This guide presents simplified methods and design techniques that facilitate and speed the engineering of low-rise buildings within certain limitations. Material is presented in an order that follows typical design process with procedures introduced as the designer will need them in the course of a building design.

📜 SIMILAR VOLUMES

314R-11 Guide to Simplified Design for R

📁 314R-11 Guide to Simplified Design for Reinforced Concrete Builidings

✍ ACI Committee 314 📂 Library 📅 2012 🏛 American Concrete Institute 🌐 English

Abstract: (For Buildings of Limited Size and Height, based on ACI 318-11 and IPS-1, "Essential Requirements for Reinforced Concrete Buildings" This guide presents simplified methods and design techniques that facilitate and speed the engineering of low-rise buildings within certain limitations.

Guidelines for the simplified design of

📁 Guidelines for the simplified design of structural reinforced concrete for buildings

📂 Scientific

Guidelines for the simplified design of

📁 Guidelines for the simplified design of structural reinforced concrete for buildings

📂 Scientific

ACI 355.3R-11 - Guide for Design of Anch

📁 ACI 355.3R-11 - Guide for Design of Anchorage to Concrete: Examples Using ACI 318 Appendix D

✍ ACI Committee 355 📂 Library 📅 2011 🏛 American Concrete Institute (ACI) 🌐 English

This guide presents worked examples using the design provisions in ACI 318 Appendix D. Not all conditions are covered in these examples. The essentials of direct tension, direct shear, combined tension and shear, and the common situation of eccentric shear, as in a bracket or corbel, are presented.

Design Guide on the ACI 318 Building Cod

📁 Design Guide on the ACI 318 Building Code Requirements for Structural Concrete

✍ CRSI 📂 Library 📅 2020 🏛 CRSI 🌐 English

<span>The purpose of this Design Guide is to assist in the proper application of the design and detailing requirements. The many design aids and worked-out examples are provided to make designing and detailing reinforced concrete members simpler and faster. The goal is to acquire an understanding of

ACI 222.3R-11 - Guide to Design and Cons

📁 ACI 222.3R-11 - Guide to Design and Construction Practices to Mitigate Corrosion of Reinforcement in Concrete Structures

✍ ACI Committee 222 📂 Library 📅 2011 🏛 American Concrete Institute (ACI) 🌐 English

Corrosion of metals in concrete is a significant problem throughout the world. In many instances, corrosion can be avoided if proper attention is given to detailing, concrete materials and mixture proportions, and construction practices. This guide contains information on aspects of each of these. I