✦ LIBER ✦

AC loss and DC critical current densities of Nb3Sn tapes by the solid state diffusion process

✍ Scribed by Suenaga, M.; Klamut, C.; Bussiere, J.

Book ID: 117923233
Publisher: IEEE
Year: 1977
Tongue: English
Weight: 560 KB
Volume: 13
Category: Article
ISSN: 0018-9464
DOI: 10.1109/tmag.1977.1059487

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Shape anisotropy in critical current den

Shape anisotropy in critical current densities of Nb3Sn tapes produced by the bronze process

✍ Suenaga, M.; Welch, D.; Higuchi, N. 📂 Article 📅 1987 🏛 IEEE 🌐 English ⚖ 433 KB

Improvements in critical current densiti

Improvements in critical current densities of internal tin diffusion process Nb3Sn wires by additions of third elements

✍ Yoshizaki, K.; Wakata, M.; Miyashita, S.; Fujiwara, F.; Taguchi, O.; Imaizumi, M 📂 Article 📅 1985 🏛 IEEE 🌐 English ⚖ 412 KB

Superconducting critical current densiti

Superconducting critical current densities of pure and alloyed (Ti) Nb3Sn multifilamentary wires by the expanded-metal process

✍ Suenaga, M.; Klamut, C.; McDonald, W. 📂 Article 📅 1983 🏛 IEEE 🌐 English ⚖ 497 KB

The fabrication and properties of Nb3Sn

The fabrication and properties of Nb3Sn superconductors by the solid diffusion process

✍ Suenaga, M.; Sampson, W.; Klamut, C. 📂 Article 📅 1975 🏛 IEEE 🌐 English ⚖ 816 KB

The degradation of the critical current

The degradation of the critical current density in a Nb3Sn tape conductor due to parallel and transversal strain

✍ B. ten Haken; H.H.J. ten Kate 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 382 KB

Influences of tensile and bending strain

Influences of tensile and bending strains on the critical current in multifilamentary Nb3Sn composites processed by Nb tube method

✍ H. Shiraki; O. Horigami; S. Murase 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 629 KB

The critical current degradation of multifilamentary NbsSn superconducting composites strained mechanically at room temperature has been investigated. The experimental results show that the effects of the Nb$n layer thickness and the speci.men wire structure, such as monolithic and stranded cable on