Abrasive wear behaviour of powder flame sprayed coatings on steel substrates

✍ Scribed by Nizamettin Kahraman; Behçet Gülenç

• Publisher: Elsevier Science
• Year: 2002
• Weight: 974 KB
• Volume: 23
• Category: Article
• ISSN: 0261-3069
• DOI: 10.1016/s0261-3069(02)00075-4

✦ Synopsis

The main purpose of thermal spraying method is to produce wear resistant surfaces. Easy applicability, very low possibility of metallurgical changes and low distortion of coated parts due to low heat transfer to the substrate and salvation of worn parts are some of the practical advantages of this process. In this study, abrasive wear behaviour of powder flame sprayed coatings on steel substrates has been investigated. Coating was carried out onto both hot and cold substrates by using four types of powders. Prior to the wear tests, the coated specimens were machined on a lathe and surface roughness and hardness measurements were carried out on the machined surfaces. Heating the substrates prior to the coating led to the decrease in the hardness of the coating layers. Abrasive wear resistance of flame sprayed coatings was seen to be dependent on the chemical composition and characteristics of coating materials and coating condition.