✦ LIBER ✦

Ab initio energetics of LaBO_{3}(001) ( B=Mn , Fe, Co, and Ni) for solid oxide fuel cell cathodes

✍ Scribed by Lee, Yueh-Lin; Kleis, Jesper; Rossmeisl, Jan; Morgan, Dane

Book ID: 111870703
Publisher: The American Physical Society
Year: 2009
Tongue: English
Weight: 840 KB
Volume: 80
Category: Article
ISSN: 1098-0121
DOI: 10.1103/physrevb.80.224101

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Synthesis and characterization of La0.6S

Synthesis and characterization of La0.6Sr0.4Co0.8Fe0.2O3 films for solid oxide fuel cell cathodes

✍ Dumaisnil, K.; Fasquelle, D.; Mascot, M.; Rolle, A.; Roussel, P.; Minaud, S.; Du 📂 Article 📅 2014 🏛 Elsevier Science 🌐 English ⚖ 724 KB

Electrochemical properties of cathodes m

Electrochemical properties of cathodes made of (La,Sr)(Fe,Co)O3containing admixtures of nanoparticles of cupric oxide and intended for fuel cells with a solid electrolyte based on ceric oxide

✍ B. L. Kuzin; N. M. Bogdanovich; D. I. Bronin; I. Yu. Yaroslavtsev; G. K. Vdovin; 📂 Article 📅 2007 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 586 KB

Synthesis and characterization La0.6Sr0.

Synthesis and characterization La0.6Sr0.4CoO3 and La0.6Sr0.4Co0.2Fe0.8O3 nanotubes for cathode of solid-oxide fuel cells

✍ J. Sacanell; M.G. Bellino; D.G. Lamas; A.G. Leyva 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 255 KB

Synthesis and properties of Ba0.5Sr0.5(C

Synthesis and properties of Ba0.5Sr0.5(Co0.6Zr0.2)Fe0.2O3−δ perovskite cathode material for intermediate temperature solid-oxide fuel cells

✍ Xiuxia Meng; Bo Meng; Xiaoyao Tan; Naitao Yang; Zi-Feng Ma 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 413 KB

Fabrication and characterization of a Ba

Fabrication and characterization of a Ba0.5Sr0.5Co0.8Fe0.2O3−δ—Gadolinia-doped ceria cathode for an anode-supported solid-oxide fuel cell

✍ Wei-Xin Kao; Maw-Chwain Lee; Tai-Nan Lin; Chun-Hsiu Wang; Yang-Chuang Chang 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 614 KB

Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-ı (BSCF) and gadolinia-doped ceria (GDC) were synthesized via a glycine-nitrate process (GNP). A cubic perovskite of BSCF was observed by X-ray diffraction (XRD) at a calcination temperature above 950 • C. An anode-supported solid-oxide fuel cell was constructed from

Development and characterization of a qu

Development and characterization of a quasi-ternary diagram based on La0.8Sr0.2(Co,Cu,Fe)O3 oxides in view of application as a cathode contact material for solid oxide fuel cells

✍ X. Montero; W. Fischer; F. Tietz; D. Stöver; M. Cassir; I. Villarreal 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 767 KB