✦ LIBER ✦

A weibull brittle failure model for biaxial loading of a notched composite material

✍ Scribed by Robert C. Wetherhold

Publisher: Elsevier Science
Year: 1981
Weight: 317 KB
Volume: 47
Category: Article
ISSN: 0025-5416
DOI: 10.1016/0025-5416(81)90053-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A note on formulas for localized failure

A note on formulas for localized failure of frictional materials in compression and biaxial loading modes

✍ Matthias Lambrecht; Christian Miehe 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 272 KB

A reply to S. Somayaji's discussion of “

A reply to S. Somayaji's discussion of “A model law for the notch sensitivity of brittle materials”

✍ S. Ziegeldorf; H.S. Müller; H.K. Hilsdorf 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 77 KB

We thank Dr. Somayaji for his interest in our work. We would like to reply to his comments as follows: I.

Model analysis of fracture and failure o

Model analysis of fracture and failure of concrete as a composite material

✍ Y. Tanigawa 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 761 KB

A fiber bridging model for the fracture

A fiber bridging model for the fracture of brittle matrix composites

✍ S.-W. Yin 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 545 KB

Almtract-A new model for composite fracture termed the fiber bridging model is introduced. In light of the proposed fiber bridging model, an expression for the stress intensity factor for brittle matrix composites is derived. Through this method, the strengthening ability of the fibers, which is mai

A discussion of the paper: A model law f

A discussion of the paper: A model law for the notch sensitivity of brittle materials, by S. Ziegeldorf, H.S. Muller, H.K. Hilsdorf

✍ Shan Somayaji 📂 Article 📅 1981 🏛 Elsevier Science 🌐 English ⚖ 126 KB

A model for service life of polyethylene

A model for service life of polyethylene pipe exhibiting ductile–brittle transition in failure mode

✍ George C. Derringer 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 437 KB 👁 1 views

This article proposes a model for predicting failure time of stressed polyethylene pipe materials that exhibit a failure mode transition from brittle to ductile as stress is increased. The model is based on data obtained using the constant tensile load (CTL) test and takes into account stress-versus