## Abstract An aperture‐coupled patch antenna with a cross slot for compact dual‐polarized operation in the 1800 MHz band (1710–1880 MHz) suitable for applications in a personal communication system (PCS) is presented. For operation in the 1800 MHz band, the proposed antenna has a square patch of d
A Vertical Patch Antenna for Dual-Band Operation
✍ Scribed by Lau, K.-L.; Wong, H.; Mak, Cl.-L.; Luk, K.-M.; Lee, K.-F.
- Book ID
- 117885064
- Publisher
- IEEE
- Year
- 2006
- Tongue
- English
- Weight
- 172 KB
- Volume
- 5
- Category
- Article
- ISSN
- 1536-1225
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this article, a novel concept of electromagnetic band‐gap (EBG) antenna is proposed: dual/multiple band antenna resonances can be achieved using a single patch radiator based on layered EBG substrates. The generalized design procedure is presented. Experimental results demonstrate go
## Abstract A novel dual‐band single‐layer patch antenna that covers the bands of 890–960 MHz for GSM and 1710–1880 MHz for DCS, with VSWR ⩽ 2:1, is presented. This antenna consists of a ground plane, air spacing (without dielectric substrate), and a metal patch layer printed on a thin substrate wi
## Abstract A novel shorted patch antenna with a shorted parasitic patch for dual‐band operation is proposed. The upper and lower operating frequencies are, respectively, controlled by the driven and parasitic patches, which are both operated as a quarter‐wavelength structure in the proposed design
## Abstract Two new configurations of patch antennas are introduced, which provide dual‐band and dual‐polarization operations. The two patches have a square and cross shape, and are printed on a single layer; the dual‐frequency and the dual‐polarization behavior is obtained by means of four narrow
## Abstract A new design of a dual‐band planar inverted‐L patch antenna suitable for applications in WLAN (2400–2484 MHz) and HIPERLAN (5150–5350 MHz) systems is proposed. By using an inverted‐L radiating patch, in which two additional narrow slits are inserted at the radiating edge to effectively