✦ LIBER ✦

A three-layer philosophy for the design of CAD software

✍ Scribed by R.R. Clements

Publisher: Elsevier Science
Year: 1985
Tongue: English
Weight: 464 KB
Volume: 17
Category: Article
ISSN: 0010-4485
DOI: 10.1016/0010-4485(85)90111-3

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Conversion matrix extraction by commerci

Conversion matrix extraction by commercial CAD software for the stability design of autonomous circuits

✍ Leonardo Pantoli; Giorgio Leuzzi; Franco Di Paolo 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 511 KB

In this article a method to extract the conversion matrix of a nonlinear circuit by commercial CAD simulators is proposed. As an example, the conversion matrix, computed from a harmonic balance simulation, is used to control the stability of oscillators under large-signal conditions. This allows the

Design of long-period gratings: Necessit

Design of long-period gratings: Necessity of a three-layer fiber geometry for cladding mode characteristics

✍ Rashmi Singh; Harish Kumar; Enakshi Khular Sharma 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 116 KB

## Abstract In this paper, we show that a complete three‐layer analysis is necessary to characterise the cladding modes in order to obtain grating period, resonances, and coupling length in the design of long‐period gratings (LPGs), and that the simplified two‐layer fiber geometry used by many auth

A methodology for the design of CAD syst

A methodology for the design of CAD systems and its implementation in an industrial environment

✍ G Rzevski 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 117 KB

Software system for three-dimensional vo

Software system for three-dimensional volumetric reconstruction of histological sections: A case study for the snake chondrocranium

✍ Hofstadler-Deiques, Clarice ;Walter, Marcelo ;Mierlo, Fábio ;Ruduit, Rodrigo 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 442 KB 👁 1 views

## Abstract Volumetric digital computer‐assisted reconstruction of histological sections is an attractive possibility for developmental studies. Commercial solutions are very expensive for many educational institutions. Therefore, we developed a software system for three‐dimensional reconstruction

The design of a translator logic circuit

The design of a translator logic circuit for a three-phase stepping motor

✍ J.F. Jackson; R. Bell 📂 Article 📅 1970 🏛 Elsevier Science ⚖ 757 KB

Process Description for the Extrusion of

Process Description for the Extrusion of Rubber Compounds – Development and Evaluation of a Screw Design Software

✍ Andreas Limper; Dominik Schramm 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB

## Abstract The development of a mathematical model to be used in a simulation software for the description of rubber extrusion operating points is presented. A discrete model for the flow has been introduced, which considers the flow in the main direction and in the cross section of the screw chan