✦ LIBER ✦

A thickness criterion for fracture toughness testing based on a plane stress compatible solution

✍ Scribed by S.A. Zhou; R.K.T. Hsieh

Publisher: Elsevier Science
Year: 1988
Tongue: English
Weight: 476 KB
Volume: 29
Category: Article
ISSN: 0013-7944
DOI: 10.1016/0013-7944(88)90005-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A modified thickness criterion for fract

A modified thickness criterion for fracture toughness testing

✍ J.C. Ritter 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 806 KB

Ahstraet--A modified criterion is developed on an empirical basis for the minimum thickness Brain of a plane strain fracture toughness test specimen: B.,. = 400 g~o Ecq. where K~, is the plane strain fracture toughness, E is the Young's modulus and ~r~, is the yield stress of the material. The modi

A comment on the plane strain fracture m

A comment on the plane strain fracture mode criterion based on the plastic zone size-thickness correlation

✍ E. Smith 📂 Article 📅 1979 🏛 Elsevier Science 🌐 English ⚖ 119 KB

A criterion for low-stress brittle fract

A criterion for low-stress brittle fracture of notched specimens based on combined micro- and macro fracture mechanics—1

✍ T. Yokobori; A. Kamei; S. Konosu 📂 Article 📅 1976 🏛 Elsevier Science 🌐 English ⚖ 915 KB

Based on the combined micro-and macro fracture mechanics, the two requisites necessary for the crack propagation, that is, the energy unstable requisite and the critical local stress requisite, are derived for the low-stress brittle fracture of notched specimens. Thus the fracture criterion was obta