## Abstract ## Background Proper placement of ports during robot‐assisted endoscopic surgery is critical to the success of the procedure. In current practice, port placement methods do not consider the ability of the robot to manoeuvre the tools. ## Methods This paper proposes to choose the best
A technical challenge for robot-assisted minimally invasive surgery: precision surgery on soft tissue
✍ Scribed by J Stallkamp; R D Schraft
- Publisher
- Wiley (Robotic Publications)
- Year
- 2005
- Tongue
- English
- Weight
- 288 KB
- Volume
- 1
- Category
- Article
- ISSN
- 1478-5951
- DOI
- 10.1002/rcs.15
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In minimally invasive surgery, a higher degree of accuracy is required by surgeons both for current and for future applications. This could be achieved using either a manipulator or a robot which would undertake selected tasks during surgery. However, a manually‐controlled manipulator cannot fully exploit the maximum accuracy and feasibility of three‐dimensional motion sequences. Therefore, apart from being used to perform simple positioning tasks, manipulators will probably be replaced by robot systems more and more in the future. However, in order to use a robot, accurate, up‐to‐date and extensive data is required which cannot yet be acquired by typical sensors such as CT, MRI, US or common x‐ray machines. This paper deals with a new sensor and a concept for its application in robot‐assisted minimally invasive surgery on soft tissue which could be a solution for data acquisition in future. Copyright © 2005 Robotic Publications Ltd.
📜 SIMILAR VOLUMES
## Abstract ## Background Computer‐assisted surgery (CAS) systems are currently used in only a few surgical specialties: ear, nose and throat (ENT), neurosurgery and orthopaedics. Almost all of these systems have been developed as dedicated platforms and work on rigid anatomical structures. The de