𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A survey of fatigue crack growth life estimation methodologies

✍ Scribed by T. Akyürek; Ö.G. Bílír

Publisher
Elsevier Science
Year
1992
Tongue
English
Weight
587 KB
Volume
42
Category
Article
ISSN
0013-7944

No coin nor oath required. For personal study only.

✦ Synopsis

In

this study, three fatigue crack growth life estimation methodologies are reviewed and sample calculations are made using these methodologies. Comparisons of the results with respect to the methodologies are made. Three computer codes which represent these methodologies, CRACKS IV, FAST and FATIGUE, are selected for the analyses. The estimations are also correlated to the test results.

📜 SIMILAR VOLUMES

Fatigue life estimation of graphite/epox
Fatigue life estimation of graphite/epoxy laminates under consideration of delamination growth
✍ H. W. Bergmann; R. Prinz 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 931 KB

A closed form approach to the assessment of the fatigue life of graphite'epoxy laminates under cyclic tension xornpression loading has been developed. The model is mechanistic and uses cyclic energy release rates for prediction of delamination growth and of critical delamination sizes which induce b

Cyclic analysis of a propagating crack a
Cyclic analysis of a propagating crack and its correlation with fatigue crack growth
✍ Kiyotsugu Ohji; Keiji Ogura; Yoshiji Ohkubo 📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 664 KB

AbUmct-S&ess and strain Md of a propagating fatigue crack and the resulting crack opening and &sing behavior were anaiyscd. It was found that a propq&g fatigue crack was closed at ten& external Ioads due to the cyclic&y induced residual stresses. Strain range v&e AC, in the vicinity of the crack tip

Elevated-temperature fatigue crack growt
Elevated-temperature fatigue crack growth behavior of a rotor steel
✍ P.K. Liaw; V.P. Swaminathan 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 460 KB

A~~act-Elevate-tem~rature fatigue crack growth behavior was investigated on a rotor steel. Increasing the tem~rature increased the rates of crack propagation. The activation energy for high-temperature crack growth was found to be comparable to that for oxide formation. A repeated process of crack-t