✦ LIBER ✦

A study on the composite screw rotors for superchargers

✍ Scribed by Young Goo Kim; Kwang Seop Jeong; Dai Gil Lee; Park Kyoun Oh

Publisher: Elsevier Science
Year: 1995
Tongue: English
Weight: 693 KB
Volume: 32
Category: Article
ISSN: 0263-8223
DOI: 10.1016/0263-8223(95)00035-6

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Study on the tooth profile for the screw

Study on the tooth profile for the screw claw-type pump

✍ Chiu-Fan Hsieh; Yii-Wen Hwang; Zhang-Hua Fong 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 758 KB

A study of the differential scheme for c

A study of the differential scheme for composite materials

✍ R. McLaughlin 📂 Article 📅 1977 🏛 Elsevier Science 🌐 English ⚖ 542 KB

9733161 A study on motor drive superchar

9733161 A study on motor drive supercharger for gasoline engine : Toshiyuki Innami, Masakichi Momono, Masayuki Shizuka (Hitachi Ltd.)

📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 134 KB

Study on effect of filler loading on the

Study on effect of filler loading on the flow and swelling behaviors of polypropylene-kaolin composites using single-screw extruder

✍ N. A. Abdul Rahim; Z. M. Ariff; A. Ariffin; S.S. Jikan 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 648 KB

A Finite Element Model for a Flexible No

A Finite Element Model for a Flexible Non-Symmetric Rotor on Distributed Bearing: a Stability Study

✍ A.G. Taylor; A. Craggs 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 569 KB

A finite element model is presented for a flexible, non-axisymmetric shaft-rotor system supported in distributed bearings. The stability of this model is analyzed over a normal rotation speed range and the results are compared with analytical and numerical studies carried out on rigid and simpler fl

Investigation on the uniformity of high-

Investigation on the uniformity of high-density polyethylene/wood fiber composites in a twin-screw extruder

✍ Jingjing Zhang; Chul B. Park; Ghaus M. Rizvi; Hanxiong Huang; Qingping Guo 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 826 KB

## Abstract Uniform dispersion of wood fiber in high‐density polyethylene can improve the mechanical properties and surface finish of the wood plastic composites. However, it is difficult to achieve uniform dispersion when the wood content is high, due to its low thermal stability, incompatibility