𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A study of the role of solid lubricant and fibrous reinforcement in modifying the wear performance of polyethersulphone

✍ Scribed by Bijwe, J. ;Rajesh, J. John ;Jeyakumar, A. ;Ghosh, A. K.

Publisher
John Wiley and Sons
Year
2000
Tongue
English
Weight
479 KB
Volume
17
Category
Article
ISSN
0265-6582

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of solid lubricant and fibrous re
Effect of solid lubricant and fibrous reinforcement on the abrasive wear of polyamides
✍ Rajesh, J. John ;Bijwe, Jayashree ;Tewari, U. S. πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 766 KB

## Abstract Short glass fibre‐reinforced polyamide 6 and polyamide 11 (PA 6 and PA 11) with and without a solid lubricant of polytetrafluoroethylene and metal powders (e.g., bronze) and copper as fillers were formulated and characterised for their compositional and mechanical properties. A tribolog

The fallacy of evaluating biomaterial we
The fallacy of evaluating biomaterial wear-rates with water as lubricant: A hip simulator study of alumina-PTFE and CoCr-PTFE combinations
✍ Phipatanakul, Wesley P. ;Johnson, Sherry A. ;Good, Victoria ;Clarke, Ian C. πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 82 KB

Controversy surrounds wear data from hipsimulator studies, whether from the choice of lubricants or other parameters such as the particular biomaterial combinations used, and whether any such interactions could bias the resulting wear predictions. To investigate these phenomena, we studied the wear

Role of cyclic plastic deformation in th
Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups
✍ Wang, A. ;Stark, C. ;Dumbleton, J. H. πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 English βš– 850 KB

The mechanisms of wear in ultra-high-molecular-weight polyethylene (UHMWPE) acetabular cups were investigated on both laboratory simulator-tested cups and a clinically retrieved component. Two different levels of wear process were identified: one characterized by the formation and detachment of plat

A 13C NMR study of the role of plasticiz
A 13C NMR study of the role of plasticizers in the conduction mechanism of solid polymer electrolytes
✍ M. Forsyth; P.M. Meakin; D.R. MacFarlane πŸ“‚ Article πŸ“… 1995 πŸ› Elsevier Science 🌐 English βš– 474 KB

The addition of low molecular weight solvents such as dimethyl formamide (DMF) and propylene carbonate (PC) to urethane crosslinked polyethers results in enhancement of polymer segmental motion, as determined in this work from polymer i3C spin lattice relaxation measurements (T,) and glass transitio

A Study of the Mechanical and Fracture B
A Study of the Mechanical and Fracture Behavior of Jute-Fabric-Reinforced Clay-Modified Thermoplastic Starch-Matrix Composites
✍ Dipa Ray; Suparna Sengupta; Siba P. Sengupta; Amar K. Mohanty; Manjusri Misra πŸ“‚ Article πŸ“… 2007 πŸ› John Wiley and Sons 🌐 English βš– 486 KB

## Abstract Starch/poly(vinyl alcohol) films plasticized with glycerol were prepared by a solution‐casting method and were used as the matrix material for making jute‐fabric‐reinforced starch‐based composites. Four sets of composites were prepared with a variation in the matrix composition, all hav