## Abstract The dynamic mechanical properties of blends of phenolic resin (PF) and acrylic rubber (ACM) were investigated. PF had good compatibility with ACM and played an important role in the damping of the ACM/PF blends. With the increase of PF content and molecular weight, the peak of loss fact
A study of the compatibility of synthetic rubbers with phenolic resins
β Scribed by P. Novakov; Ch. Konstantinov; P. Mitanov
- Publisher
- John Wiley and Sons
- Year
- 1972
- Tongue
- English
- Weight
- 276 KB
- Volume
- 16
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The compatibility of blends of polystyrene with ethylene-propylene--diene rubber was studied using an ultrasonic method. The variation of the velocity of ultrasonic wave with composition of the blend is not linear. This non-linearity is attributed to incompatibility in conformity with earlier findin
## Abstract The miscibility and some physicomechanical characteristics of chlorinated polyethylene rubber (CPE) and nitrile rubber (NBR) blends have been investigated. Calculation of the heat of mixing, differential scanning calorimetry, and scanning electron microscopy analysis showed that CPE was
## Abstract Phenolic novolac resins have been modified with chestnut tannin for reduction of phenol content in resins. In this work, rheological and kinetic analysis of curing reactions of these resins with hexamethylenetetramine (hexamine) has been performed. Chemical structure of obtained materia