limitations and assumptions of the method are discussed, with reference to other methods of measurement. Modulus measurements of recently developed graphites are included to illustrate the feasibility and reproducibility of the method.
A study of the amplitude of vibration of carbon atoms in the graphite structure
โ Scribed by E.A Kellett; B.P Jackets; B.P Richards
- Publisher
- Elsevier Science
- Year
- 1964
- Tongue
- English
- Weight
- 722 KB
- Volume
- 2
- Category
- Article
- ISSN
- 0008-6223
No coin nor oath required. For personal study only.
โฆ Synopsis
The changes with temperature in the integrated intensity of the 0004 and 0006 reflections from graphite specimens have been measured by means of an X-ray counter diffractometer, using a high temperature attachment developed originally for thermal expansion studies. Three varieties of graphite were examined, a spectroscopic material of pN 0.2, a pyrolytic carbon of p2: 0.1 and a pyrolytic carbon ~~0.8. The range of temperature between 1200 and 2500ยฐC was covered. Values of the amplitude of vibration of carbon atoms normal to the layer planes were derived from the intensity measurements and a room temperature value of 0.099 _.& was assumed. Tables and graphical representations of the results are presented. It is shown that the amplitude of vibration increases continuously with temperature for all the samples in the temperature range considered and at elevated temperatures the amplitude increases nearly as rapidly as the interlayer spacing; hence the mean "free space" between the layer planes decreases as temperature increases. The degree to which atomic movement is hindered in the graphite structure is a function of stacking disorder and not of the degree of preferred orientation of the graphite.
๐ SIMILAR VOLUMES
Structural changes which accompany the catalytic graphitization of carbon have been investigated. Utilizing X-ray diffraction and high temperature microscopy techniques, the effectiveness of various additives in promoting the formation of graphite from a variety of carbon materials of varying degree
initiation and propagation mechanisms under tensile 45045 Orleans, France). No long or short abstract loading. These results were used in developing an submitted. analytical model for tensile failure based on microstructural parameters and micromechanical principles. 61. Structural evolution of a gl