✦ LIBER ✦

A simple x-band waveguide-to-microstrip E-probe transition

✍ Scribed by D. S. Dunn; G. L. Dunn; C. G. Christodoulou

Book ID: 112145441
Publisher: John Wiley and Sons
Year: 1990
Tongue: English
Weight: 306 KB
Volume: 3
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.4650030511

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A simple K-band waveguide-to-microstrip

A simple K-band waveguide-to-microstrip probe transition

✍ Alessandro Navarrini; Tonino Pisanu; Sergio Mariotti; Tonio Idda 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 249 KB

## Abstract We describe the design, construction, and test of a simple K‐band waveguide‐to‐microstrip transition based on a radial‐shaped probe patterned on a quartz substrate. From 16 to 28 GHz, the measured reflection coefficient at the coaxial SMA input, used for test purposes of the adapter, wa

A simple microstrip to dielectric wavegu

A simple microstrip to dielectric waveguide transition

✍ Jeffrey A. Miller; Ming-Yi Li; Kai Chang 📂 Article 📅 1989 🏛 John Wiley and Sons 🌐 English ⚖ 423 KB

A broad-band microstrip-to-waveguide tra

A broad-band microstrip-to-waveguide transition using quasi-Yagi antenna

✍ Kaneda, N.; Qian, Y.; Itoh, T. 📂 Article 📅 1999 🏛 IEEE 🌐 English ⚖ 464 KB

A Waveguide to Microstrip Inline Transit

A Waveguide to Microstrip Inline Transition With Very Simple Modular Assembly

✍ Yunchi Zhang; Ruiz-Cruz, J.A.; Zaki, K.A.; Piloto, A.J. 📂 Article 📅 2010 🏛 IEEE 🌐 English ⚖ 456 KB

A waveguide-to-microstrip transition wit

A waveguide-to-microstrip transition with a DC-IF return path and an offset probe

✍ Shi, S.C.; Inatani, J. 📂 Article 📅 1997 🏛 IEEE 🌐 English ⚖ 500 KB

Rectangular waveguide-to-CPW transition

Rectangular waveguide-to-CPW transition without air-bridge in the Ka-band

✍ A. Ramdane; E. Richalot; O. Picon; J. Puech; L. Lapierre 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB

## Abstract The proposed waveguide‐to‐CPW transition is uniplanar, in line with the waveguide, and without air‐bridge. Composed of a fin‐line taper and a circular phase‐shifter, it presents in simulation an insertion loss and a return loss better than 0.63 and 16.8 dB between 27 and 31 GHz. Measure