## Abstract This paper presents a new approach to the realization of dual‐band operation in a single printed‐dipole antenna by incorporating compact resonant cell (CRC) structures. A dual‐band antenna that operates at 900 MHz and 2.4 GHz is constructed to illustrate the design methodology. The over
A simple printed dipole antenna with dual-band behavior
✍ Scribed by Pei Cheng Ooi; Krishnasamy T. Selvan
- Publisher
- John Wiley and Sons
- Year
- 2011
- Tongue
- English
- Weight
- 348 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This paper reports a simple printed dipole antenna which exhibits dual‐band operations.The antenna's radiation pattern is bidirectional in the x–y plane and close‐to‐omnidirectional in the x–z plane. The 10 dB impedance bandwidths achieved are 38.6% and 4.7% centered at 1.1 and 2.3 GHz, respectively. The impedance and radiation characteristics of the proposed antenna, as studied by both simulation and experiment, are satisfactory. The antenna's performance compares well with that of a recently proposed dipole antenna with fractal shape. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26226
📜 SIMILAR VOLUMES
## Abstract In this article, a double‐printed dipole antenna with band‐notched function for UWB applications is proposed and investigated. The band‐notched characteristic is achieved by inserting two U‐shaped slots on the dipole. Experimental and numerical results show that the proposed antenna mee
## Abstract A dual and wide‐band printed dipole antenna is presented for IMT‐2000 and 5.2/5.4/5.8‐GHz WLAN applications. The proposed balun‐fed antenna consists of a double‐sided printed dipole antenna with a microstrip‐fed disk‐dipole printed on the top side of the substrate, and a modified annula
## Abstract This paper proposes a novel dual‐band printed inverted‐F antenna, and a constructed prototype suitable for applications in the WLAN (2400–2484 MHz) and HIPERLAN (5150–5350 MHz) systems is presented. The antenna consists of two stacked inverted‐F strips printed on a dielectric substrate,