๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

A simple investigation of the cross-modulation distortion arising from the pulling effect in a frequency-modulated klystron

โœ Scribed by Gjessing, D.T.

Book ID
119746164
Publisher
Institution of Electrical Engineers
Year
1959
Weight
506 KB
Volume
106
Category
Article
ISSN
2054-0418

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

The authors' replies to the discussion o
The authors' replies to the discussion on "A simple investigation of the cross-modulation distortion arising from the pulling effect in a frequency-modulated klystron", "Theory and behaviour of helix structures for a high-power pulsed travelling-wave tubeร‚ยฟ, "A multi-cavity klystron with double-tuned output circuit" and "A method for the measurement of very high Q-factors of electromagnetic resonators"
โœ Gjessing, D.T.; Buckley, G.W.; Gunson, J.; Curnow, H.J.; Mathias, L.E.S.; James, ๐Ÿ“‚ Article ๐Ÿ“… 1959 ๐Ÿ› Institution of Electrical Engineers โš– 442 KB
Discussion on ร‚ยฟA simple investigation o
Discussion on ร‚ยฟA simple investigation of the cross-modulation distortion arising from the pulling effect in a frequency-modulated klystronร‚ยฟ, ร‚ยฟTheory and behaviour of helix structures for a high-power pulsed travelling-wave tubeร‚ยฟ, ร‚ยฟA multi-cavity klystron with double-tuned output circuitร‚ยฟ and ร‚ยฟA method for the measurement of very high Q-factors of electromagnetic resonatorsร‚ยฟ before the Electronics and Communications Section, 23rd February, 1959
๐Ÿ“‚ Article ๐Ÿ“… 1959 ๐Ÿ› Institution of Electrical Engineers โš– 406 KB
The use of a klystron oscillator, stabil
The use of a klystron oscillator, stabilized by a superconducting resonator, in an e p r spectrometer with high frequency modulator
โœ V.B. Ginodman; I.S. Gladkov; Yu.V. Dedik; Z.F. Kaplun ๐Ÿ“‚ Article ๐Ÿ“… 1971 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 256 KB

The outer diameter of this wire is 0" 52 mm and the ratio of A1 to NbTi is 1"0. The current field characteristic of the wire, for instance, heat treated at 300 C for 80 hours, is presented in Figure 2. With these results, the mean current density in the wire is 30 000 A cm -2 at 50 kG. Figure 3 show