A simple impedance-matching technique for patch antennas fed by coplanar microstrip line
✍ Scribed by Row, J.-S.
- Book ID
- 118746158
- Publisher
- IEEE
- Year
- 2005
- Tongue
- English
- Weight
- 174 KB
- Volume
- 53
- Category
- Article
- ISSN
- 0018-926X
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this study, it is shown how dual‐band performance can be achieved from a single coplanar‐waveguide‐fed slot by using an impedance matching design approach. The coplanar‐waveguide‐fed slot is connected to a high‐impedance coplanar‐waveguide transmission line stub terminated with a cap
## Abstract A low‐cost microstrip‐line‐fed shorted‐patch antenna suitable for applications in a PCS (1710–1880 MHz band) base station is presented. Both the shorted patch and the 50 Ω microstrip feed line have an air substrate, and the material cost is thus reduced to be minimum. And by using a pai
A circularly polarized CP circular patch microstrip antenna with a cross slot using an L-shaped probe fed by a microstrip line is designed and measured. With the single L-probe, the impedance bandwidth, the axial-ratio bandwidth, and the gain bandwidth are 27, ( ) 3.47, and 26%, respecti¨ely, for th