𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A simple device for quality control of polymer films, using measurements of permeation and diffusion coefficients

✍ Scribed by B. Marcandalli; E. Selli; R. Tacchi; I.R. Bellobono; G. Leidi

Book ID
107747692
Publisher
Elsevier Science
Year
1984
Tongue
English
Weight
616 KB
Volume
51
Category
Article
ISSN
0011-9164

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Construction of a temperature-controlled
Construction of a temperature-controlled diffusion phantom for quality control of diffusion measurements
✍ Carolin Reischauer; Philipp Staempfli; Thomas Jaermann; Peter Boesiger πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 833 KB

## Abstract ## Purpose To construct a temperature‐controlled diffusion phantom with known diffusion properties and geometry in order to facilitate the comparison and optimization of diffusion sequences with the objective of increasing the precision of experimentally derived diffusion parameters.

Simulation and modelling of transient pe
Simulation and modelling of transient permeation of organic solvents through polymer films in the case of a concentration dependent diffusion coefficient
✍ Robert ClΓ©ment; Quang Trong Nguyen; Jean Marie Grosse; Petr Uchytil πŸ“‚ Article πŸ“… 1995 πŸ› John Wiley and Sons 🌐 English βš– 662 KB

## Abstract The measured transient permeation kinetics of acetic acid from a water‐acetic acid mixture through poly(vinyl alcohol) films could not be accounted for by the Fick law with a constant diffusion coefficient. A new calculation procedure was developed on the basis of simulation results of

Impedance Measurements as a Simple Tool
Impedance Measurements as a Simple Tool to Control the Quality of Conjugated Polymers Designed for Photovoltaic Applications
✍ Pavel A. Troshin; Diana K. Susarova; Yury L. Moskvin; Ilya E. Kuznetsov; Sergei πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 636 KB

## Abstract The problem of batch‐to‐batch variation of electronic properties and purity of conjugated polymers used as electron donor and photon harvesting materials in organic solar cells is addressed. A simple method is developed for rapid analysis of electronic quality of polymer‐based materials