✦ LIBER ✦

A simple and effective model for electromagnetic bandgap structures embedded in printed circuit boards

✍ Scribed by Shahparnia, S.; Ramahi, O.M.

Book ID: 121237746
Publisher: IEEE
Year: 2005
Tongue: English
Weight: 162 KB
Volume: 15
Category: Article
ISSN: 1531-1309
DOI: 10.1109/LMWC.2005.856695

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A Simple and Efficient Design Procedure

A Simple and Efficient Design Procedure for Planar Electromagnetic Bandgap Structures on Printed Circuit Boards

✍ Raimondo, L.; De Paulis, F.; Orlandi, A. 📂 Article 📅 2011 🏛 IEEE 🌐 English ⚖ 965 KB

Analytical model for electromagnetic ban

Analytical model for electromagnetic bandgap structures embedded in power/ground plane

✍ Xin Wu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB

## Abstract This study presents an analytical model to calculate the stop band of the electromagnetic bandgap (EBG) materials embedded in PCB power/ground plane to mitigate power/ground plane noise. By treating the EBG structure as lumped elements at each unit, the currents flowing through the EBG

[IEEE 2005 IEEE Antennas and Propagation

[IEEE 2005 IEEE Antennas and Propagation Society International Symposium - Washington, DC, USA (3-8 July 2005)] 2005 IEEE Antennas and Propagation Society International Symposium - Analysis of electromagnetic bandgap structures embedded in printed circuit boards using the transmission line and periodic structure theory

✍ Shahparnia, S.; Ramahi, O.M. 📂 Article 📅 2005 🏛 IEEE ⚖ 768 KB

[IEEE IEEE Antennas and Propagation Soci

[IEEE IEEE Antennas and Propagation Society Symposium, 2004. - Monterey, CA, USA (2004.06.20-2004.06.25)] IEEE Antennas and Propagation Society Symposium, 2004. - Simple and accurate circuit models for high-impedance surfaces embedded in printed circuit boards

✍ Shahparnia, S.; Ramahi, O.M. 📂 Article 📅 2004 🏛 IEEE 🌐 English ⚖ 190 KB

A hybrid model by clustering and evolvin

A hybrid model by clustering and evolving fuzzy rules for sales decision supports in printed circuit board industry

✍ Pei-Chann Chang; Chen-Hao Liu; Yen-Wen Wang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 384 KB

The authors' replies to the discussion o

The authors' replies to the discussion on "A simple investigation of the cross-modulation distortion arising from the pulling effect in a frequency-modulated klystron", "Theory and behaviour of helix structures for a high-power pulsed travelling-wave tubeÂ¿, "A multi-cavity klystron with double-tuned output circuit" and "A method for the measurement of very high Q-factors of electromagnetic resonators"

✍ Gjessing, D.T.; Buckley, G.W.; Gunson, J.; Curnow, H.J.; Mathias, L.E.S.; James, 📂 Article 📅 1959 🏛 Institution of Electrical Engineers ⚖ 442 KB