✦ LIBER ✦

A review of metallic, ceramic and surface-treated metals used for bearing surfaces in human joint replacements

✍ Scribed by Dearnley, P. A.

Book ID: 118736196
Publisher: SAGE Publications
Year: 1999
Tongue: English
Weight: 604 KB
Volume: 213
Category: Article
ISSN: 0954-4119
DOI: 10.1243/0954411991534843

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A review of advanced metallic and cerami

A review of advanced metallic and ceramic materials suitable for high temperature use in space structures

✍ David Bashford 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 669 KB

Norway Spruce: A Novel Method using Surf

Norway Spruce: A Novel Method using Surface Characteristics and Heavy Metal Concentrations of Needles for a Large-Scale Monitoring Survey in Austria

✍ C. Trimbacher; P. Weiss 📂 Article 📅 2004 🏛 Springer Netherlands 🌐 English ⚖ 799 KB

[IEEE 1991 IEEE International Joint Conf

[IEEE 1991 IEEE International Joint Conference on Neural Networks - Singapore (18-21 Nov. 1991)] [Proceedings] 1991 IEEE International Joint Conference on Neural Networks - Fast detection and classification of defects on treated metal surfaces using a backpropagation neural network

✍ Neubauer, C. 📂 Article 📅 1991 🏛 IEEE ⚖ 320 KB

A percutaneous implant using a porous me

A percutaneous implant using a porous metal surface coating for adhesion to bone and a velour covering for soft tissue attachment: Results of trials in pigs

✍ Fernie, G. R. ;Kostuik, J. P. ;Lobb, R. J. ;Pilliar, R. M. ;Wong, E. ;Binnington 📂 Article 📅 1977 🏛 John Wiley and Sons 🌐 English ⚖ 597 KB

## Abstract A percutaneous implant for the attachment of an artificial limb has been designed and tested in 14 pigs. Firm fixation to beone was achieved with the porous‐surface layered metal intramedullary stem design in some cases. Dacron velour was used at the soft tissue interface. Evidence of s

Densification mechanisms and mechanical

Densification mechanisms and mechanical properties of a tungsten alloy: C. Chausse, F. Nardou (Laboratory for Ceramic Materials and Surface Treatments, Limoges, France) Revue de Metall., Vol 90, No 5, 1993, 624–628. (In French)

📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 132 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB