𝔖 Bobbio Scriptorium

✦ LIBER ✦

A review of enabling technologies based on scanning probe microscopy relevant to bioanalysis

✍ Scribed by Sverre Myhra

Book ID: 108071554
Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 329 KB
Volume: 19
Category: Article
ISSN: 0956-5663
DOI: 10.1016/j.bios.2003.12.016

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Health-enabling technologies for the eld

Health-enabling technologies for the elderly – An overview of services based on a literature review

✍ Wolfram Ludwig; Klaus-Hendrik Wolf; Christopher Duwenkamp; Nathalie Gusew; Nils 📂 Article 📅 2012 🏛 Elsevier Science 🌐 English ⚖ 417 KB

Application of scanning electron microsc

Application of scanning electron microscopy to investigating the abrasion of fabrics based on pneumatically texturized yarns

✍ M. P. Nosov; N. K. Tarasenko; A. S. Ternovaya; V. N. Bykov; T. S. Nazarenko 📂 Article 📅 1988 🏛 Springer US 🌐 English ⚖ 529 KB

The use of CT scan based planning for or

The use of CT scan based planning for oral rehabilitation by means of implants and its transfer to the surgical field: a critical review on accuracy

✍ M. VERCRUYSSEN; R. JACOBS; N. VAN ASSCHE; D. Van STEENBERGHE 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB

[IEEE IMTC/99. 16th IEEE Instrumentation

[IEEE IMTC/99. 16th IEEE Instrumentation and Measurement Technology Conference. Measurements for the New Millennium - Venice, Italy (24-26 May 1999)] IMTC/99. Proceedings of the 16th IEEE Instrumentation and Measurement Technology Conference (Cat. No.99CH36309) - A six-port based on-line measurement system using special probe with conical open end to determine relative complex permittivity at radio and microwave frequencies

✍ Lan, F.; Akyel, C.; Ghannouchi, F.M.; Gauthier, J.; Khouaja, S. 📂 Article 📅 1999 🏛 IEEE 🌐 English ⚖ 432 KB

An innovative method for estimating the

An innovative method for estimating the roll angle in two-wheeled vehicles is proposed. the roll angle is a crucial variable in the dynamics of two-wheeled vehicles, since it greatly affects the behaviour of the tire-road contact forces. hence, the capability of providing in real time a reliable measure of such quantity allows us to evaluate the dynamic properties of the vehicle and its tyres, and represents the enabling technology for the design of advanced braking, traction and stability control systems. the method proposed is based on a lowcost sensor configuration, suitable for industrial purposes. the validity of the proposed approach is assessed in a multi-body motorbike simulator environment and also on an instrumented test vehicle.

✍ Boniolo, I.; Savaresi, S.M.; Tanelli, M. 📂 Article 📅 2009 🏛 The Institution of Engineering and Technology 🌐 English ⚖ 1001 KB

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB