A realization of a high-frequency monolithic integrator with low power dissipation and its application to an active RC filter
✍ Scribed by Fujihiko Matsumoto; Yukio Ishibashi
- Publisher
- Springer
- Year
- 1996
- Tongue
- English
- Weight
- 810 KB
- Volume
- 11
- Category
- Article
- ISSN
- 0925-1030
No coin nor oath required. For personal study only.
✦ Synopsis
According as the fine LSI process technique develops, the technique to reduce power dissipation of highfrequency integrated analog circuits is getting more important. This paper describes a design of high-frequency integrator with low power dissipation for monolithic leapfrog filters. In the design of the conventional monolithic integrators, there has been a great difficulty that a high-frequency integrator which can operate at low supply voltage cannot be realized without additional circuits, such as unbalanced-to-balanced conversion circuits and commonmode feedback circuits. The proposed integrator is based on the Miller integrator. By a PNP current mirror circuit, high CMRR is realized. However, the high-frequency characteristic of the integrator is independent of PNP transistors. In addition, it can operate at low supply voltage. The excess phase shift of the integrator is compensated by insertion of the compensation capacitance. The effectiveness of the proposed technique is confirmed by PSPICE simulation. The simulation results of the integrator shows that the common-mode gain is efficiently low and the virtual ground is realized, and that moderate phase compensation can be achieved. The simulation results of the 3rd-order leapfrog filter using the integrator shows that the 50 MHz-cutoff frequency filter is obtained. Its power dissipation in operating 2 V-supply voltage is 5.22 mW.