✦ LIBER ✦

A Portable Anechoic Chamber for PAD Use

✍ Scribed by Hutchinson, F. W.; Lazarewicz, A. J.

Book ID: 117904545
Publisher: Institute of Electrical and Electronics Engineers
Year: 1963
Tongue: English
Weight: 794 KB
Volume: 1
Category: Article
ISSN: 0536-1516
DOI: 10.1109/ta.1963.4319364

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Using Free-Space Transmission Loss for E

Using Free-Space Transmission Loss for Evaluating Anechoic Chamber Performance

✍ Gerrell, R.G.F. 📂 Article 📅 1982 🏛 IEEE 🌐 English ⚖ 620 KB

A microwave anechoic chamber for radar-c

A microwave anechoic chamber for radar-cross section measurement

✍ Chung, B.K.; Chuah, H.T.; Bredow, J.W. 📂 Article 📅 1997 🏛 IEEE 🌐 English ⚖ 657 KB

A highly efficient and accurate procedur

A highly efficient and accurate procedure for semi-anechoic chamber analysis using circuital techniques

✍ L. Nuño; J. V. Balbastre; F. D. Quesada 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 88 KB

## Abstract This paper reports on a new method for the determination of the performance qualities of a semi‐anechoic chamber used for electromagnetic compatibility measurements. This approach, based on highly efficient and accurate circuital techniques, provides very good results on low‐cost deskto

Comparison of electromagnetic absorber u

Comparison of electromagnetic absorber used in anechoic and semi-anechoic chambers for emissions and immunity testing of digital devices

✍ Holloway, C.L.; DeLyser, R.R.; German, R.F.; McKenna, P.; Kanda, M. 📂 Article 📅 1997 🏛 IEEE 🌐 English ⚖ 414 KB

A 100-1000 MHz field strength standard f

A 100-1000 MHz field strength standard for an anechoic chamber

✍ Matsui, T. 📂 Article 📅 1991 🏛 IEEE 🌐 English ⚖ 485 KB

A design criterion for sound-absorbent l

A design criterion for sound-absorbent lining of an anechoic chamber

✍ W.A. Davern 📂 Article 📅 1972 🏛 Elsevier Science 🌐 English ⚖ 84 KB

The usual criterion of 10 % or less pressure reflection for lining materials of anechoic chambers is related to the real and imaginary parts of the specific acoustic impedance ratio, allowing some more direct relationship between the acoustic and physical properties of the lining material.