𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A parametric study on the process-induced deformation of composite T-stiffener structures

✍ Scribed by Chensong Dong


Book ID
116378763
Publisher
Elsevier Science
Year
2010
Tongue
English
Weight
350 KB
Volume
41
Category
Article
ISSN
1359-835X

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Process-induced deformation of composite
✍ Chensong Dong πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 671 KB

Composite T-stiffener structures are widely used structural elements in weight sensitive structural, aerospace and marine applications for the purpose of weight reduction. A study on the process-induced deformation of composite T-stiffener structures is presented in this paper. The deformation was c

A study on the robustness of two stiffen
✍ Merrill C.W. Lee; Donald W. Kelly; Richard Degenhardt; Rodney S. Thomson πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 894 KB

The European Commission project COCOMAT aimed at exploiting the large reserve of strength in composite structures through more accurate prediction of collapse. As part of the research program, curved stiffened composite panels of various designs have been manufactured and tested in compression. In t

A parametric study on the natural freque
✍ YΔ±ldΔ±rΔ±m, Vebil πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 803 KB

## Abstract This paper deals with the combined influences of the vibrational parameters chosen as the material types, number of active turns, helix pitch angle, minimum to maximum radii of the cylinder and maximum cylinder to wire diameters on the first six resonance frequencies of unidirectional c

Parametric study on the batch leaching p
✍ Mamdouh A. Allawzi; Mousa K. Abu-Arabi; Faraj A. Al-Taher πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 156 KB

## Abstract In this study, hexane is used as solvent to extract Jojoba oil in a batch leaching process. The effects of temperature, mixing speed, particle size and solvent‐to‐seed ratio on Jojoba oil extraction were investigated. The best recovery of oil was obtained when the parameters investigate