## Abstract In this letter, a novel compact wideband bandpass filter (BPF) using single asymmetric stepped‐impedance resonator with one‐step discontinuity is designed and fabricated. The first two resonant modes of the asymmetric SIR are coupled together and applied to create a wide passband. The p
A novel schema to design a compact, low loss, high rejection LTCC bandpass filter
✍ Scribed by Wen-His Lee; Chi-Yi Su; Ching-Chnag Yi
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 290 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel design of compact comb‐line LTCC filter to have three attenuation poles including two attenuation poles in the lower stopband and an attenuation pole in the higher stopband is presented. The proposed filter has been implemented in 5‐layer ceramic tapes using LTCC technology and shows very promising electric properties performance. The insertion loss is less than 2 dB from 5.15 to 5.25 GHz in passband and the rejection of filter is very shape in the passband edge. The filter with novel schema design and implementing by LTCC has been demonstrated to possess simultaneously the low insertion loss and the high attenuation EM simulation results are well agreed with the measured results. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 896–898, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22254
📜 SIMILAR VOLUMES
## Abstract A novel compact ultra‐wideband bandpass filter is designed by using a microstrip three‐mode resonator. The three‐mode resonator is configured by adding a short‐circuited stub and an open stub to a half‐wavelength resonator, and its first three modes are designed to cover a very wide pas