A Novel Modified Carbon Paste Electrode for Potentiometric Determination of Mercury(II) Ion
✍ Scribed by Mohammad Hossein Mashhadizadeh; Mehrzad Talakesh; Mahnaz Peste; Ahmad Momeni; Houshang Hamidian; Mohammad Mazlum
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 498 KB
- Volume
- 18
- Category
- Article
- ISSN
- 1040-0397
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A new modified carbon paste electrode (CPE) based on a recently synthesized ligand of Ethyl‐2‐(benzoylamino)‐3‐(2‐hydroxy‐4‐methoxyphenyl)‐2‐propenoate (EBHMP) as a suitable carrier for Hg^2+^ ion was described. The electrode exhibit a super Nernstian slope of 48.5±1.0 mV per decade for Hg^2+^ ion over a wide concentration range from 3.0×10^−7^–3.1×10^−2^ M. The lower detection limits are 1.0×10^−7^ M Hg^2+^. The electrode has a fast response time (ca. 5 s), a satisfactory reproducibility and relatively long life time. The proposed sensor shows a fairly good selectivity toward Hg^2+^ ion in comparison to other common cations. The potentiometric responses are independent of the pH of the test solution in the pH range 1.0–4.0. The proposed electrode was used as an indicator electrode in potentiometric titration of mercuric ion with standard solution of EDTA. The direct determination of mercury in spiked wastewater and an amalgam sample gave results that compare favorably with those obtained by the cold vapor atomic absorption spectrometric method.
📜 SIMILAR VOLUMES
## Abstract A new chemically modified carbon paste electrode based on a mixture of two ion‐exchangers namely chlorpheniramine‐silicotungstate (CPM‐ST) and chlorpheniramine‐tetraphenylborate (CPM‐TPB) as ion‐exchange site for determination of chlorpheniramine maleate (CPM) was described. The best pe
## Abstract A new modified carbon paste electrode (CPE) based on a recently synthesized ligand [2‐mercapto‐5‐(3‐nitrophenyl)‐1,3,4‐thiadiazole] (MNT), self‐assembled to gold nanoparticles (GNP) as suitable carrier for Cd(II) ion with potentiometric method are described. The proposed electrode exhib