𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A novel accelerator combination for the low temperature curing of silica-filled NBR compounds

✍ Scribed by Shiny Palaty; Rani Joseph

Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
338 KB
Volume
102
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Zinc salts of ethyl, isopropyl, and butyl xanthates were prepared in the laboratory. The effect of these xanthates in combination with zinc diethyldithiocarbamate (ZDC) on the vulcanization of silica‐filled NBR compounds has been studied at different temperatures. The cure times of these compounds were compared with that of NBR compounds containing tetramethylthiuram disulphide/dibenzthiazyl disulphide. The rubber compounds with the xanthates and ZDC were cured at various temperatures from 60 to 150Β°C. The sheets were molded and properties such as tensile strength, tear strength, crosslink density, elongation at break, compression set, abrasion resistance, flex resistance, heat buildup, etc. were evaluated. The properties showed that zinc salt of xanthate/ZDC combination has a positive synergistic effect on the cure rate and mechanical properties of NBR compounds. Β© 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5680–5683, 2006

πŸ“œ SIMILAR VOLUMES

Wood flour: A new filler for the rubber
Wood flour: A new filler for the rubber processing industry. I. Cure characteristics and mechanical properties of wood flour-filled NBR and NBR/PVC compounds
✍ T. Vladkova; St. Vassileva; M. Natov πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 187 KB πŸ‘ 2 views

## Abstract In this study, conifer wood flour was evaluated as a filler to NBR or NBR/PVC compounds studying it influence on their cure characteristics and mechanical properties. It was shown that the filling by wood flour offers a possibility to obtain high modulus high elastic or less elastic or